background image

13 HP, 30 GallON air 

cOmPressOr

65204 

99918

set uP aNd OPeratiNG iNstructiONs

 

using an engine indoors caN Kill YOu iN 

miNutes.
engine exhaust contains carbon monoxide.  

this is a poison you cannot see or smell.

NeVer use inside 

a home or garage, 

eVeN iF doors and 

windows are open.

Only use Outside 

and far away from 

windows, doors, 

and vents.

Visit our website at: http://www.harborfreight.com

 read this material before using this product. 

Failure to do so can result in serious injury. 

saVe tHis maNual.

Copyright

©

 2008 by Harbor Freight Tools

®

.  All rights reserved.  No portion of this manual or any artwork 

contained  herein  may  be  reproduced  in  any  shape  or  form  without  the  express  written  consent  of 

Harbor Freight Tools.  Diagrams within this manual may not be drawn proportionally.  Due to continuing 

improvements,  actual  product  may  differ  slightly  from  the  product  described  herein.   Tools  required  for 

assembly and service may not be included.

For technical questions or replacement parts, please call 1-800-444-3353.

manual revised 09c, 09e, 09i

Summary of Contents for 65204




















Reviews: