HP PowerTrust A3589A, Manual

Page: 33 / 257

Chapter 1 1-11
Overview
Control Panel Switches and Indicators
Figure 1-3 Rear Panel Connectors, Switches, and Indicators (North American
Version)
1
AC Power Input A line cord with NEMA 6-50P plug attached. Used to connect the North
American version of the UPS to an AC source or wall outlet. Figure 1-3
shows the AC power input for the 30A Service Bypass Unit. For
information on the 40A Service Bypass Unit, refer to Appendix E, “40A
Service Bypass Unit: Specifications and Procedures.”.
2
IEC Output
Receptacles
Three IEC320 C19 output receptacles are available on both North
American and worldwide versions of the PowerTrust UPS. Up to three
expansion cabinet Power Distribution Units (PDUs) can be plugged in
here.
3
NEMA Output One NEMA L6-30R output receptacle (North American version only). An
SPU, peripheral, or PDU in an adjacent expansion cabinet plugs in here.
Figure 1-3 shows the NEMA output for the 30A Service Bypass Unit. For
information on the 40A Service Bypass Unit, refer to Appendix E, “40A
Service Bypass Unit: Specifications and Procedures.”