S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
31-15
Cisco MDS 9000 Family CLI Configuration Guide
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Chapter 31 Configuring SNMP
SNMP Trap and Inform Notifications
User Auth Priv(enforce) Groups
____ ____ _____________ ______
admin md5 des(no) network-admin
testusr md5 aes-128(no) role111
role222
______________________________________________________________
NOTIFICATION TARGET USERS (configured for sending V3 Inform)
______________________________________________________________
User Auth Priv
____ ____ ____
testtargetusr md5 des
(EngineID 0:0:0:63:0:1:0:0:0:15:10:3)
Example 31-2 Displays SNMP Community Information
switch#
show snmp community
Community Access
--------- ------
private rw
public ro
v93RACqPNH ro
Example 31-3 Displays SNMP Host Information
switch#
show snmp host
Host Port Version Level Type SecName
____ ____ _______ ______ ____ ______
171.16.126.34 2162 v2c noauth trap public
171.16.75.106 2162 v2c noauth trap public
...
171.31.58.97 2162 v2c auth trap public
...
The
show snmp
command displays counter information for SNMP contact, location, and packet settings.
This command provides information that is used entirely by the Cisco MDS 9000 Family Fabric Manager
(refer to the
Cisco MDS 9000 Family Fabric Manager Configuration Guide
). See
Example 31-4
.
Example 31-4 Displays SNMP Information
switch#
show snmp
sys contact:
sys location:
1631 SNMP packets input
0 Bad SNMP versions
0 Unknown community name
0 Illegal operation for community name supplied
0 Encoding errors
64294 Number of requested variables
1 Number of altered variables
1628 Get-request PDUs
0 Get-next PDUs
1 Set-request PDUs
152725 SNMP packets output
0 Too big errors
1 No such name errors
0 Bad values errors
0 General errors
Community Group / Access
--------- ------
