S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
54-9
Cisco MDS 9000 Family CLI Configuration Guide
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Chapter 54 Configuring Call Home
Call Home Message Level Feature
Note
Make sure the destination profiles for a non-Cisco-TAC alert group, with a predefined
show
command,
and the Cisco-TAC alert group are not the same.
To customize Call Home alert group messages, follow these steps:
Verifying Alert Group Customization
To verify the alert group customization, use the
show callhome user-def-cmds
command.
switch#
show callhome user-def-cmds
User configured commands for alert groups :
alert-group test user-def-cmd "show version"
Call Home Message Level Feature
The Call Home message level feature allows you to filter messages based on their level of urgency. Each
destination profile (predefined and user-defined) is associated with a Call Home message level threshold.
Any message with a value lower that the urgency threshold is not sent. The urgency level ranges from 0
(lowest level of urgency) to 9 (highest level of urgency), and the default is 0 (all messages are sent).
Note
Call Home severity levels are not the same as system message logging severity levels.
To set the message level for each destination profile for Call Home, follow these steps:
Command
Purpose
Step 1
switch#
config t
Enters configuration mode.
Step 2
switch(config)#
callhome
switch(config-callhome)#
Enters Call Home configuration submode.
Step 3
switch(config-callhome)#
alert-group license
user-def-cmd "show license usage"
Configures a user-defined
show
command for an
alert group license.
Note
The
show
command must be enclosed in
double quotes. Only valid
show
commands are accepted.
switch(config-callhome)#
no alert-group
license user-def-cmd "show license usage"
Removes the user-defined
show
command from
the alert group.
Command
Purpose
Step 1
switch#
config t
Enters configuration mode.
Step 2
switch(config)#
callhome
switch(config-callhome)#
Enters Call Home configuration submode.