S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
44-10
Cisco MDS 9000 Family CLI Configuration Guide
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Chapter 44 Configuring IP Storage
Displaying Statistics
0 carrier errors
Example 44-2 Displays the Gigabit Ethernet Subinterface
switch#
show interface gigabitethernet 4/2.100
GigabitEthernet4/2.100 is up
Hardware is GigabitEthernet, address is 0005.3000.abcb
Internet address is 10.1.2.100/24
MTU 1500 bytes
5 minutes input rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
5 minutes output rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
0 packets input, 0 bytes
0 multicast frames, 0 compressed
0 input errors, 0 frame, 0 overrun 0 fifo
1 packets output, 46 bytes, 0 underruns
0 output errors, 0 collisions, 0 fifo
0 carrier errors
Displaying Ethernet MAC Statistics
The
show ips stats mac interface gigabitethernet
command takes the main Gigabit Ethernet interface
as a parameter and returns Ethernet statistics for that interface. See
Example 44-3
.
Note
Use the physical interface, not the subinterface, to display Ethernet MAC statistics.
Example 44-3 Displays Ethernet MAC Statistics
switch#
show ips stats mac interface gigabitethernet 8/1
Ethernet MAC statistics for port GigabitEthernet8/1
Hardware Transmit Counters
237 frame 43564 bytes
0 collisions, 0 late collisions, 0 excess collisions
0 bad frames, 0 FCS error, 0 abort, 0 runt, 0 oversize
Hardware Receive Counters
427916 bytes, 3464 frames, 0 multicasts, 3275 broadcasts
0 bad, 0 runt, 0 CRC error, 0 length error
0 code error, 0 align error, 0 oversize error
Software Counters
3429 received frames, 237 transmit frames
0 frames soft queued, 0 current queue, 0 max queue
0 dropped, 0 low memory
Displaying DMA-Bridge Statistics
You can display direct memory access (DMA) device statistics using the
show ips stats dma-bridge
interface gigabitethernet
command. This command takes the main Gigabit Ethernet interface as a
parameter and returns DMA bridge statistics for that interface. See
Example 44-4
.
Note
Use the physical interface, not the subinterface, to display DMA-bridge statistics.