S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
54-29
Cisco MDS 9000 Family CLI Configuration Guide
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Chapter 54 Configuring Call Home
Message Contents
Table 54-8
User-Generated Test Message Format
Data Item
(Plain text and XML)
Description
(Plain text and XML)
XML Tag
(XML only)
Time stamp
Date and time stamp of event in ISO time notation:
YYYY-MM-DD
T
HH:MM:SS
.
Note
The time zone or daylight savings time (DST) offset from UTC
has already been added or subtracted. T is the hardcoded limiter
for the time.
/mml/header/time
Message name
Name of message. Specifically test message for test type message.
Specific event names listed in the
“Event Triggers” section on
page 54-21
).
/mml/header/name
Message type
Specifically “Test Call Home”.
/mml/header/type
Message group
This field should be ignored by the receiving Call Home processing
application, but may be populated with either “proactive” or “reactive”.
/mml/header/group
Severity level
Severity level of message, test Call Home message (see
Table 54-4
).
/mml/header/level
Source ID
Product type for routing.
/mml/header/source
Device ID
Unique device identifier (UDI) for end device generating message. This
field should empty if the message is non-specific to a fabric switch.
Format:
type@Sid@serial
, where
•
type
is the product model number from backplane SEEPROM.
•
@ is a separator character.
•
Sid
is “C” identifying the serial ID as a chassis serial number·
•
serial
is the number identified by the Sid field.
Example: DS-C9509@C@12345678
/mml/ header /deviceId
Customer ID
Optional user-configurable field used for contract info or other ID by any
support service.
/mml/ header /customerId
Contract ID
Optional user-configurable field used for contract info or other ID by any
support service.
/mml/ header /contractId
Site ID
Optional user-configurable field used for Cisco-supplied site ID or other
data meaningful to alternate support service.
/mml/ header /siteId
Server ID
If the message is generated from the fabric switch, it is the Unique device
identifier (UDI) of the switch.
Format:
type@Sid@serial
, where
•
type
is the product model number from backplane SEEPROM.
•
@ is a separator character.
•
Sid
is “C” identifying the serial ID as a chassis serial number·
•
serial
is the number identified by the Sid field.
Example: “DS-C9509@C@12345678
/mml/header/serverId
Message description Short text describing the error.
/mml/body/msgDesc
Device name
Switch that experienced the event.
/mml/body/sysName
