S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
25-22
Cisco MDS 9000 Family CLI Configuration Guide
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Chapter 25 Configuring Fibre Channel Routing Services and Protocols
Default Settings
0x65(101) 0x00001094 0x00001084 1 500
Displaying FSPF Interfaces
Example 25-9
displays the following
information for each selected interface.
•
Link cost
•
Timer values
•
Neighbor’s domain ID (if known)
•
Local interface number
•
Remote interface number (if known)
•
FSPF state of the interface
•
Interface counters
Example 25-9 Displays FSPF Interface Information
switch#
show fspf vsan 1 interface fc1/1
FSPF interface fc1/1 in VSAN 1
FSPF routing administrative state is active
Interface cost is 500
Timer intervals configured, Hello 20 s, Dead 80 s, Retransmit 5 s
FSPF State is FULL
Neighbor Domain Id is 0x0c(12), Neighbor Interface index is 0x0f100000
Statistics counters :
Number of packets received : LSU 8 LSA 8 Hello 118 Error packets 0
Number of packets transmitted : LSU 8 LSA 8 Hello 119 Retransmitted LSU 0
Number of times inactivity timer expired for the interface = 0
Default Settings
Table 25-4
lists the default settings for FSPF features.
Table 25-4
Default FSPF Settings
Parameters
Default
FSPF
Enabled on all E ports and TE ports.
SPF computation
Dynamic.
SPF hold time
0.
Backbone region
0.
Acknowledgment interval (RxmtInterval)
5 seconds.
Refresh time (LSRefreshTime)
30 minutes.
Maximum age (MaxAge)
60 minutes.
Hello interval
20 seconds.
Dead interval
80 seconds.
Distribution tree information
Derived from the principal switch (root node).
