S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
52-32
Cisco MDS 9000 Family CLI Configuration Guide
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Chapter 52 Monitoring Network Traffic Using SPAN
Default SPAN and RSPAN Settings
Note
Multiple tunnel IDs can terminate at the same interface.
Example 52-14 Displays FC Tunnel Explicit Mapping Information
switch#
show fc-tunnel explicit-path
Explicit path name: Alternate1
10.20.1.2 loose
10.20.1.3 strict
Explicit path name: User2
10.20.50.1 strict
10.20.50.4 loose
Example 52-15 Displays SPAN Mapping Information
switch#
show span session
Session 2 (active)
Destination is fc-tunnel 100
No session filters configured
Ingress (rx) sources are
fc2/16,
Egress (tx) sources are
fc2/16,
Example 52-16 Displays the FC Tunnel Interface
switch#
show interface fc-tunnel 200
fc-tunnel 200 is up
Dest IP Addr: 200.200.200.7 Tunnel ID: 200
Source IP Addr: 200.200.200.4 LSP ID: 1
Explicit Path Name:
Default SPAN and RSPAN Settings
Table 52-1
lists the default settings for SPAN parameters.
Table 52-2
lists the default settings for RSPAN parameters.
Table 52-1
Default SPAN Configuration Parameters
Parameters
Default
SPAN session
Active.
If filters are not specified
SPAN traffic includes traffic through a specific interface from all active
VSANs.
Encapsulation
Disabled.
SD port
Output frame format is Fibre Channel.
