S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
58-18
Cisco MDS 9000 Family CLI Configuration Guide
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Chapter 58 Troubleshooting Your Fabric
The show tech-support Command
The show tech-support zone Command
Use the
show tech-support zone
command to obtain information about the zoning configuration on your
switch (see
Example 58-9
).
The output of the
show tech-support zone
command includes the output of the following commands:
•
show zone status vsan
•
show zone active vsan
•
show zoneset vsan
•
show zone vsan
•
show zone-attribute-group vsan
•
show zone policy vsan
•
show zoneset pending active vsan
•
show zoneset pending vsan
•
show zone active vsan
•
show zone pending active vsan
•
show fcalias pending vsan
•
show zone-attribute-group pending vsan
•
show zone policy pending vsan
•
show zone pending-diff vsan
•
show zone analysis active vsan
•
show zone analysis vsan
•
show zone ess vsan
•
show zone statistics vsan
•
show zone statistics lun-zoning vsan
•
show zone statistics read-only-zoning vsan
Tip
You can save the output of this command to a file by appending
>
(left arrow) and the filename to the
show tech-support zone
command (see the
“Saving Command Output to a File” section on page 2-32
).
Example 58-9 Displays the Zoning Configurations
switch#
show tech-support zone vsan 1
`show zone status vsan 1`
VSAN: 1 default-zone: permit distribute: active only Interop: default
mode: basic merge-control: allow session: none
hard-zoning: enabled
Default zone:
qos: disabled broadcast: disabled ronly: disabled
Full Zoning Database :
Zonesets:0 Zones:0 Aliases: 0
Active Zoning Database :
Name: vhost-zone Zonesets:1 Zones:9
Status: Activation failed [Error: Unknown error Dom 21]:
at 23:36:44 UTC Dec 19 2005
