manualshive.com logo in svg

HP 9124 - Cisco MDS Fabric Switch, Configuration Manual

The HP 9124 - Cisco MDS Fabric Switch is a high-performance networking device designed for seamless data transmission. Unlock its full potential by accessing the comprehensive Configuration Manual, available for free download from our website. Enhance your user experience and optimize your network setup with this essential manual.

Share
Download
background image

S e n d   d o c u m e n t a t i o n   c o m m e n t s   t o   m d s f e e d b a c k - d o c @ c i s c o . c o m

22-23

Cisco MDS 9000 Family CLI Configuration Guide

OL-16184-01, Cisco MDS SAN-OS Release 3.x

Chapter 22      Configuring Inter-VSAN Routing

Configuring IVR

    1  20:02:00:44:22:00:4a:05     yes     yes  1-2,6

    1  20:02:00:44:22:00:4a:07     yes     yes  2-5

Total:   5 entries in active IVR VSAN-Topology

Current Status: Inter-VSAN topology is ACTIVE

Last activation time: Sat Mar 22 21:46:15 

Example 22-3 Displays the Configured IVR VSAN Topology 

switch# 

show ivr vsan-topology configured

AFID  SWITCH WWN                 Active   Cfg. VSANS

--------------------------------------------------------------

    1  20:00:00:05:30:01:1b:c2 *   yes     yes  1-2

    1  20:02:00:44:22:00:4a:05     yes     yes  1-2,6

    1  20:02:00:44:22:00:4a:07     yes     yes  2-5

Total:   5 entries in configured IVR VSAN-Topology

Migrating from IVR Auto Topology Mode to Manual Mode

If you want to migrate the active IVR VSAN topology database from automatic mode to user-configured 
mode, first copy the active IVR VSAN topology database to the user-configured IVR VSAN topology 
database before switching modes. 

To migrate from automatic mode to manual mode, follow these steps:

About IVR Virtual Domains

In a remote VSAN, the IVR application does not automatically add the virtual domain to the assigned 
domains list. Some switches (for example, the Cisco SN5428) do not query the remote name server until 
the remote domain appears in the assigned domains list in the fabric. In such cases, add the IVR virtual 
domains in a specific VSAN(s) to the assigned domains list in that VSAN. When adding IVR domains, 
all IVR virtual domains that are currently present in the fabric (and any virtual domain that is created in 
the future) will appear in the assigned domain list for that VSAN. 

Tip

Be sure to add IVR virtual domains if Cisco SN5428 or MDS 9020 switches exist in the VSAN.

When you enable the IVR virtual domains, links may fail to come up due to overlapping virtual domain 
identifiers. If so, temporarily withdraw the overlapping virtual domain from that VSAN. 

Command

Purpose

Step 1

switch# 

ivr copy auto-topology 

user-configured-topology

Copies the automatic IVR topology database to 
the user-configured IVR topology.

Step 2

switch# 

config t

switch(config)#

Enters configuration mode.

Step 3

switch(config)# 

ivr vsan-topology active

Disabled automatic mode for the IVR topology 
database and enables user-configuration mode.

Summary of Contents for 9124 - Cisco MDS Fabric Switch





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 9124 - Cisco MDS Fabric Switch

Patton electronics 3004 User Manual preview
3004
Brand: Patton electronics Pages: 6
Paradyne 6501 Quick Installation preview
6501
Brand: Paradyne Pages: 1
TP-Link TL-PA201 STARTER Specifications preview
TL-PA201 STARTER
Brand: TP-Link Pages: 2
HomeMatic HM-LC-Dim1L-Pl-2 Operating Manual preview
HM-LC-Dim1L-Pl-2
Brand: HomeMatic Pages: 15
Lindy 43238 User Manual preview
43238
Brand: Lindy Pages: 2
Yealink MShare Quick Start Manual preview
MShare
Brand: Yealink Pages: 8
Linksys AG310 User Manual preview
AG310
Brand: Linksys Pages: 87
IBM ThinkPad Enhanced Drive Adapter User Manual preview
ThinkPad Enhanced Drive Adapter
Brand: IBM Pages: 82
Adaptec 1890600 Hardware Installation Manual preview
1890600
Brand: Adaptec Pages: 12
Jabra LINK 350 Datasheet preview
LINK 350
Brand: Jabra Pages: 2
Cameo WLN-1502 User Manual preview
WLN-1502
Brand: Cameo Pages: 19
Socket Cordless Serial Adapter User Manual preview
Cordless Serial Adapter
Brand: Socket Pages: 49
Socket CompactFlash/SDIO Connection Kit with Bluetooth Wireless Technology User Manual preview
CompactFlash/SDIO Connection Kit with Bluetooth Wireless Technology
Brand: Socket Pages: 91
Helo DSA Product Manual preview
DSA
Brand: Helo Pages: 41
CE Labs DCB101 Instruction Manual preview
DCB101
Brand: CE Labs Pages: 2
Compaq Pavilion zd7000 - Notebook PC Function Manual preview
Pavilion zd7000 - Notebook PC
Brand: Compaq Pages: 46
Belkin F5U119 User Manual preview
F5U119
Brand: Belkin Pages: 44
Chauvet Net-X User Manual preview
Net-X
Brand: Chauvet Pages: 64

Brands by name

Popular brands

Load more brands