manualshive.com logo in svg

HP 9124 - Cisco MDS Fabric Switch, Configuration Manual

The HP 9124 - Cisco MDS Fabric Switch is a high-performance networking device designed for seamless data transmission. Unlock its full potential by accessing the comprehensive Configuration Manual, available for free download from our website. Enhance your user experience and optimize your network setup with this essential manual.

Share
Download
background image

S e n d   d o c u m e n t a t i o n   c o m m e n t s   t o   m d s f e e d b a c k - d o c @ c i s c o . c o m

42-53

Cisco MDS 9000 Family CLI Configuration Guide

OL-16184-01, Cisco MDS SAN-OS Release 3.x

Chapter 42      Configuring iSCSI

Configuring iSLB

VVR Id   VRRP IP        Switch WWN                Ifindex                 Load

--------------------------------------------------------------------------------

M 1      10.10.122.115  20:00:00:0b:5f:3c:01:80   GigabitEthernet2/1.441  0

  1      10.10.122.115  20:00:00:0b:5f:3c:01:80   GigabitEthernet2/2.441  1000

  1      10.10.122.115  20:00:00:0c:ce:5c:5b:c0   GigabitEthernet1/1.441  3000

  1      10.10.122.115  20:00:00:0c:ce:5c:5b:c0   GigabitEthernet1/2.441  1000 

                    -- Initiator To Interface Assignment --

--------------------------------------------------------------------------------

Initiator                VR Id VRRP IP      Switch WWN              Ifindex

--------------------------------------------------------------------------------

iqn.cisco.test-linux.init0 1  10.10.122.115 20:00:00:0c:ce:5c:5b:c0 GigabitEthernet1/1.441

iqn.cisco.test-linux.init1 1  10.10.122.115 20:00:00:0b:5f:3c:01:80 GigabitEthernet2/2.441

iqn.cisco.test-linux.init2 1  10.10.122.115 20:00:00:0c:ce:5c:5b:c0 GigabitEthernet1/2.441

The follow example output shows load distribution for four initiators. The interface load metric value 
for the master interface changed from 0 to 1000. 

switch# 

show islb vrrp summary

...

--------------------------------------------------------------------------------

VVR Id   VRRP IP        Switch WWN                Ifindex                 Load

--------------------------------------------------------------------------------

M 1      10.10.122.115  20:00:00:0b:5f:3c:01:80   GigabitEthernet2/1.441  1000

  1      10.10.122.115  20:00:00:0b:5f:3c:01:80   GigabitEthernet2/2.441  3000

  1      10.10.122.115  20:00:00:0c:ce:5c:5b:c0   GigabitEthernet1/1.441  1000

  1      10.10.122.115  20:00:00:0c:ce:5c:5b:c0   GigabitEthernet1/2.441  1000

                     -- Initiator To Interface Assignment --

--------------------------------------------------------------------------------

Initiator                VR Id VRRP IP      Switch WWN              Ifindex

--------------------------------------------------------------------------------

iqn.cisco.test-linux.init0 1  10.10.122.115 20:00:00:0b:5f:3c:01:80 GigabitEthernet2/2.441

iqn.cisco.test-linux.init1 1  10.10.122.115 20:00:00:0c:ce:5c:5b:c0 GigabitEthernet1/2.441

iqn.cisco.test-linux.init2 1  10.10.122.115 20:00:00:0c:ce:5c:5b:c0 GigabitEthernet1/1.441

iqn.cisco.test-linux.init3 1  10.10.122.115 20:00:00:0b:5f:3c:01:80 GigabitEthernet2/1.441

The following example output shows load distribution for nine initiators. The interface load metric 
values for the backup interfaces have changed. 

switch# 

show islb vrrp summary

...

--------------------------------------------------------------------------------

VVR Id   VRRP IP        Switch WWN                Ifindex                 Load

--------------------------------------------------------------------------------

M 1      10.10.122.115  20:00:00:0b:5f:3c:01:80   GigabitEthernet2/1.441  2000

  1      10.10.122.115  20:00:00:0b:5f:3c:01:80   GigabitEthernet2/2.441  3000

  1      10.10.122.115  20:00:00:0c:ce:5c:5b:c0   GigabitEthernet1/1.441  3000

  1      10.10.122.115  20:00:00:0c:ce:5c:5b:c0   GigabitEthernet1/2.441  3000

                     -- Initiator To Interface Assignment --

--------------------------------------------------------------------------------

Initiator                VR Id VRRP IP      Switch WWN              Ifindex

--------------------------------------------------------------------------------

iqn.cisco.test-linux.init0 1  10.10.122.115 20:00:00:0b:5f:3c:01:80 GigabitEthernet2/2.441

iqn.cisco.test-linux.init1 1  10.10.122.115 20:00:00:0c:ce:5c:5b:c0 GigabitEthernet1/1.441

iqn.cisco.test-linux.init2 1  10.10.122.115 20:00:00:0c:ce:5c:5b:c0 GigabitEthernet1/2.441

iqn.cisco.test-linux.init3 1  10.10.122.115 20:00:00:0b:5f:3c:01:80 GigabitEthernet2/1.441

iqn.cisco.test-linux.init4 1  10.10.122.115 20:00:00:0c:ce:5c:5b:c0 GigabitEthernet1/1.441

iqn.cisco.test-linux.init5 1  10.10.122.115 20:00:00:0c:ce:5c:5b:c0 GigabitEthernet1/2.441

iqn.cisco.test-linux.init6 1  10.10.122.115 20:00:00:0c:ce:5c:5b:c0 GigabitEthernet1/1.441

iqn.cisco.test-linux.init7 1  10.10.122.115 20:00:00:0c:ce:5c:5b:c0 GigabitEthernet1/2.441

iqn.cisco.test-linux.init8 1  10.10.122.115 20:00:00:0b:5f:3c:01:80 GigabitEthernet2/1.441

Summary of Contents for 9124 - Cisco MDS Fabric Switch





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 9124 - Cisco MDS Fabric Switch

Yamaha UD-WL01 Connection Manual preview
UD-WL01
Brand: Yamaha Pages: 6
Sennheiser MKH-P6 Instructions For Use preview
MKH-P6
Brand: Sennheiser Pages: 1
Targus ACA958USZ User Manual preview
ACA958USZ
Brand: Targus Pages: 8
Ampetronic ATT100-T42 Manual preview
ATT100-T42
Brand: Ampetronic Pages: 2
Everex Magic I/O EV-170 Owner'S Manual And Reference Manual preview
Magic I/O EV-170
Brand: Everex Pages: 40
Roche ACCU-CHECK Instructions For Use preview
ACCU-CHECK
Brand: Roche Pages: 2
ZNYX NetBlaster ZX345 User Manual preview
NetBlaster ZX345
Brand: ZNYX Pages: 12
3idee csl-f7b Assembly Instructions Manual preview
csl-f7b
Brand: 3idee Pages: 6
CAB PS7 Operator'S Manual preview
PS7
Brand: CAB Pages: 10
Adaptec AHA-1540C Installation Manual preview
AHA-1540C
Brand: Adaptec Pages: 5
Linksys PAP2 Installation Manual preview
PAP2
Brand: Linksys Pages: 10
Sony PRSA-CC1 User Manual preview
PRSA-CC1
Brand: Sony Pages: 2
Sony PCWA-C800S Read This First Specifications preview
PCWA-C800S Read This First
Brand: Sony Pages: 1
Sony PRSA-AC1A User Manual preview
PRSA-AC1A
Brand: Sony Pages: 2
Sony SA-NS300 Specifications preview
SA-NS300
Brand: Sony Pages: 4
Sony NVA-CU3 Notice preview
NVA-CU3
Brand: Sony Pages: 2
Sony NPA-D100K Operating Instructions preview
NPA-D100K
Brand: Sony Pages: 2
Sony NPA-MQZ1K Operating Instructions preview
NPA-MQZ1K
Brand: Sony Pages: 2

Brands by name

Popular brands

Load more brands