manualshive.com logo in svg

HP 9124 - Cisco MDS Fabric Switch, Configuration Manual

The HP 9124 - Cisco MDS Fabric Switch is a high-performance networking device designed for seamless data transmission. Unlock its full potential by accessing the comprehensive Configuration Manual, available for free download from our website. Enhance your user experience and optimize your network setup with this essential manual.

Share
Download
background image

S e n d   d o c u m e n t a t i o n   c o m m e n t s   t o   m d s f e e d b a c k - d o c @ c i s c o . c o m

59-10

Cisco MDS 9000 Family CLI Configuration Guide

OL-16184-01, Cisco MDS SAN-OS Release 3.x

Chapter 59      Monitoring System Processes and Logs

Kernel Core Dumps

2      5                radius            6103    Jan 29 01:55

2      5                radius            6104    Jan 29 01:57

Kernel Core Dumps

Caution

Changes to the kernel cores should be made by an administrator or individual who is completely familiar 
with switch operations.

When a specific module’s operating system (OS) crashes, it is sometimes useful to obtain a full copy of 
the memory image (called a 

kernel core dump

) to identify the cause of the crash. When the module 

experiences a kernel core dump it triggers the proxy server configured on the supervisor. The supervisor 
sends the module’s OS kernel core dump to the Cisco MDS 9000 System Debug Server. Similarly, if the 
supervisor OS fails, the supervisor sends its OS kernel core dump to the Cisco MDS 9000 System Debug 
Server.

Note

The Cisco MDS 9000 System Debug Server is a Cisco application that runs on Linux. It creates a 
repository for kernel core dumps. You can download the Cisco MDS 9000 System Debug Server from 
the Cisco.com website at 

http://www.cisco.com/kobayashi/sw-center/sw-stornet.shtml

.

Kernel core dumps are only useful to your technical support representative. The kernel core dump file, 
which is a large binary file, must be transferred to an external server that resides on the same physical 
LAN as the switch. The core dump is subsequently interpreted by technical personnel who have access 
to source code and detailed memory maps. 

Tip

Core dumps take up disk space on the Cisco MDS 9000 System Debug Server application. If all levels 
of core dumps (

level all 

option) are configured, you need to ensure that a minimum of 1 GB of disk space 

is available on the Linux server running the Cisco MDS 9000 System Debug Server application to accept 
the dump. If the process does not have sufficient space to complete the generation, the module resets 
itself. All changes made to kernel cores are saved to the running configuration.

This section includes the following topics:

  •

Configuring External Servers, page 59-11

  •

Configuring Module Parameters, page 59-11

  •

Displaying Kernel Core Information, page 59-11

Summary of Contents for 9124 - Cisco MDS Fabric Switch





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 9124 - Cisco MDS Fabric Switch

Alps Electric miniSD SCHF Series Specification Sheet preview
miniSD SCHF Series
Brand: Alps Electric Pages: 2
I-Gard DSP-CA Instruction Manual preview
DSP-CA
Brand: I-Gard Pages: 9
Mini Gadgets BB2Outlet User Manual preview
BB2Outlet
Brand: Mini Gadgets Pages: 12
Grandstream Networks HandyTone-286 Rev 3.0 User Manual preview
HandyTone-286 Rev 3.0
Brand: Grandstream Networks Pages: 12
NETGEAR MA 101 Specifications preview
MA 101
Brand: NETGEAR Pages: 2
Zonet ZUC2400 User Manual preview
ZUC2400
Brand: Zonet Pages: 9
Devolo dLAN 200 AVpro Manual preview
dLAN 200 AVpro
Brand: Devolo Pages: 22
Planet WNL-U554M User Manual preview
WNL-U554M
Brand: Planet Pages: 69
Netopia 3-D Reach Utility User Manual preview
3-D Reach Utility
Brand: Netopia Pages: 64
Contec EAD-CE-EC User Manual preview
EAD-CE-EC
Brand: Contec Pages: 19
Contec BUF-PCI(98) User Manual preview
BUF-PCI(98)
Brand: Contec Pages: 107
EnGenius EUB-9603H User Manual preview
EUB-9603H
Brand: EnGenius Pages: 43
Techly 8051128107395 User Manual preview
8051128107395
Brand: Techly Pages: 16
Linksys USB200M Specifications preview
USB200M
Brand: Linksys Pages: 2
Linksys USB300M User Manual preview
USB300M
Brand: Linksys Pages: 31
Linksys USB100TX - EtherFast 10/100 USB Network Adapter User Manual preview
USB100TX - EtherFast 10/100 USB Network Adapter
Brand: Linksys Pages: 28
Linksys USB200M Quick Installation Manual preview
USB200M
Brand: Linksys Pages: 64
Dongguan Binshi BTA007 Quick Start Manual preview
BTA007
Brand: Dongguan Binshi Pages: 6

Brands by name

Popular brands

Load more brands