S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
23-41
Cisco MDS 9000 Family CLI Configuration Guide
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Chapter 23 Configuring and Managing Zones
Default Settings
Unassigned Zones: 1
zone name z1 vsan 1
Note
The maximum size of the full zone database per VSAN is 2000 KB.
Example 23-34 Active Zoning Database Analysis
switch#
show zone analysis active vsan 1
Zoning database analysis vsan 1
Active zoneset: zs1 [*]
Activated at: 08:03:35 UTC Nov 17 2005
Activated by: Local [ GS ]
Default zone policy: Deny
Number of devices zoned in vsan: 0/2 (Unzoned: 2)
Number of zone members resolved: 0/2 (Unresolved: 2)
Num zones: 1
Number of IVR zones: 0
Number of IPS zones: 0
Formattted size: 38 bytes / 2048 Kb
Note
The maximum size of the active zone set database per VSAN is 2000 KB.
Example 23-35 Zone Set Analysis
switch#
show zone analysis zoneset zs1 vsan 1
Zoning database analysis vsan 1
Zoneset analysis: zs1
Num zonesets: 1
Num zones: 0
Num aliases: 0
Num attribute groups: 0
Formattted size: 20 bytes / 2048 Kb
See the
Cisco MDS 9000 Family Command Reference
for the description of the information displayed
in the command output.
Default Settings
Table 23-5
lists the default settings for basic zone parameters.
Table 23-5
Default Basic Zone Parameters
Parameters
Default
Default zone policy
Denied to all members.
Full zone set distribute
The full zone set(s) is not distributed.
Zone based traffic priority
Low.
Read-only zones
Read-write attributes for all zones.
Broadcast frames
Sent to all Nx ports.
