3idee hp-34f Assembly Instructions Manual Download Page 1

Page: 1 / 7

www.3idee.eu

hp-34f VESA adapter

Assembly

instructions

The 3idee VESA adapter

is compatible with the following product

from

(hp.com) compatible:

34f

With the VESA adapter, you can conveniently attach your HP brand monitor to a
monitor arm with a VESA hole pattern

(75 x 75mm

). Use the included screws and

nuts.

If you want to mount your VESA adapter directly to the wall, use suitable screws
and dowels

(not included

Summary of Contents for hp-34f

Page 1: ...lowing product from hp hp com compatible 34f With the VESA adapter you can conveniently attach your HP brand monitor to a monitor arm with a VESA hole pattern 75 x 75mm Use the included screws and nuts If you want to mount your VESA adapter directly to the wall use suitable screws and dowels not included ...

Page 4: ...4 Assembly instructions Scope of Delivery Accessories 4x M4x14 Phillips head screw SP5 4x M4 Locknut SP5 2x M3x8 Phillips head screw SP5 ...

Page 6: ... not get damaged Remove the base of the monitor Step 2 Figure 1 Loosen the two screws on the bottom of the white clip Then you can pull it off the monitor Figure 1 Step 3 Figure 2 The preparation is complete now you can attach the 3idee Vesa adapter to your monitor arm wall Use the provided screws and nuts Figure 2 ...

Page 7: ...igure 3 Hold the monitor firmly while it is not yet fixed to the mount with the 2 screws The screw holes in the Vesa adapter should now be aligned with the threads in the metal part of the monitor Step 5 Figure 4 Now screw the 2 small screws from below into the Vesa adapter until they are flush and tight with the monitor Figure 4 Powered by TCPDF www tcpdf org ...