manualshive.com logo in svg

Honeywell 4022, System Manual, Page: 237 / 239

Share
Download
Honeywell 4022 System Manual Download Page 237

Glossary 

 

p/n 6510020208 

10/18/07 

 

11-3 

PMP 

Precision Measurement Processor 

The computer and I/O enclosure that supports the motion control 
of the sensor head and the raw processing of the sensor voltages. 
Also known as the 

MSS

. Located in a separate remote enclosure. 

PrecisionPak 

A set of upper and lower heads mounted on the Precision Platform. 
The sensors are installed within the PrecisionPak, which travels 
back and forth on the rails of the Precision Platform. 

Quality Manager 

See 

SSP. 

QCS 

Quality Control System 

A computer system which manages the quality of the paper 
produced. 

RAE 

Real-Time Application Environment 

The system software used by Da Vinci QCS to manage data 
exchange between applications (with Performance CD being one of 
them). 

Recipe 

A list of pulp chemicals, additives, and dyes blended together to 
make a particular grade of paper.  

Remote PMP 

Precision Measurement Processor remotely mounted. 

RTDR 

Real-Time Data Repository 

The database managed by RAE to store system data and data for 
individual applications. 

Scan Position 

A constant position (in millimeters) measured from the Cable End. 

SSP 

Scanner Support Processor.  

SDP 

Sensor Data Processor 

The computer in the system that performs system-level functions 
involving processing of inputs from other system computers, and 
outputs to the other system and plant computers connected to the 
plant Local Area Network.  

Summary of Contents for 4022
















































































































































































































































Reviews:

No comments