manualshive.com logo in svg

Honeywell 4022, System Manual, Page: 175 / 239

Share
Download
Honeywell 4022 System Manual Download Page 175

Preventive Maintenance Schedules 

Maintaining a scanner logbook 

p/n 6510020208 

10/18/07 

 

8-5 

Procedure Daily 

Weekly 

Months 

Years 

Procedure 

Details 

 

    1 6 1 3 5 

 

LIQUID COOLING 
SYSTEMS 

 

 

 

 

 

 

 

9.10 

Open loop cooling system 
maintenance  

X       

9.10.1.1 

Closed loop cooling system 
maintenance 

X      

XX

∗

9.10.1.2 

Chiller maintenance 

 XX        XX

∗

 

9.10.1.3 

PMP ENCLOSURE 
COOLING 

 

      9.10 

Leaking coolant in heat 
exchanger drain 

X       

9.10.1.4 

Air flow from heat 
exchanger fans 

   X     

9.10.1.4 

Solenoid valve on heat 
exchanger replacement 

       X    

9.10.1.4 

RADIATION 

SAFETY 

        

9.11 

Required radiation safety 
tests on all nuclear and X-
ray sensors  

    

X    

Radiation 

Safety 

Manual 

6510020199 

Radiation lamps 
replacement (3 mos) 

        9.11 

 

8.2.  Maintaining a scanner logbook 

A scanner/sensor maintenance logbook must be made for each scanner. 
The daily, weekly, monthly, yearly, checklist should be signed off each 
time it is performed (including inspection date, who inspected, what was 
done, and other pertinent information). Also, enter any changes to the 
scanner in the logbook. This includes any items that have been replaced, 
air pressure and flow changes, coolant flow changes, scanner damage, 

                                                 

∗

 To prolong the anti-rust, corrosion, scale, and heat transfer properties of the coolant mixture an additive 

6530220027 EXTENDER, COOLANT HD ANTIFREEZE is required after three years of operation. The additive 
is to be added in a ratio of 45:1 with the capacity of the cooling system. 

Summary of Contents for 4022
















































































































































































































































Reviews:

No comments