Holip HLP-A Series, Instruction Manual

Page: 18 / 117

HLP-A Series
HLP-A Series -
13
-
V. Wiring
1. Main Circuit Wiring Schematic Diagram
Power supply:
● Verify that the inverter’s rated voltage coincides
with AC power supply voltage to avoid a damage
of the inverter
No fuse breaker:
● Refer to the related list
Ground fault circuit interrupter:
● Use one of anti-high harmonic
Electromagnetic contactor:
● Note: Do not use the electromagnetic contactor as
the on/off button of power supply for the inverter
AC reactor:
● It is recommended to install an AC reactor for
power factor improvement if the input capacity is
more than 1000KVA.
Inverter:
● Be sure to make correct connections of the main
circuit wires and control signal wires of the
inverter.
● Be sure to make correct setting of parameters for
the inverter.