Holip HLP-A Series, Instruction Manual

Page: 35 / 117

HLP-A Series
HLP-A Series
-
30
-
Parameter and Function List (Part 3)
Category Code Function
Set Range & Function
Explanation
Factory
Setting
In
put
an
d O
ut
put
Te
rm
ina
ls
*CD056 Multi-output 1(DRV) 0: Invalid; 1: Run;
2: Fault indication;
3: Zero Speed;
4: Braking indication;
5: Set Frequency reach;
6: Arbitrary Frequency 1
reach;
7: Arbitrary Frequency 2
reach;
8: In Accel.; 9: In Decel.;
10: Inverter Overload alarm;
11: Motor Overload alarm;
12: Over-torque alarm;
13: Low voltage alarm;
14: Single stage end
indication;
15: Process end indication;
16: Counter reach;
17: Middle Counter Reach;
18: External Control Time 1
Reach;
19: External Control Time 2
Reach;
20: 4~20mA disconnected;
21~24: Reserved;
25: Auxiliary Pump 1;
26: Auxiliary Pump 2;
27: Drawing reach;
28:PID lower limit alarm;
29: PID upper limit alarm;
30: Fan act; 31: Reserved;
32: Braking resistor act
01
*CD057 Multi-output 2(UPF) 05
*CD058
Multi-output
3(Terminals of
FA,FB,FC)
02
*CD059
Multi-output
4(Terminals of
KA,KB)
00
CD060 Multi-output 5(AM)
Output of digital frequency
signals
0
CD061 Uniform Frequency 1 0.00~400.00 Hz 0.00
CD062 Uniform Frequency 2 0.00~400.00 Hz 0.00
CD063
Uniform Frequency
Range
0.10~10.00 Hz 0.50
CD064 Counting value set 0~65500 0
CD065 Analog Input
0: 0~10V 1: 0~5V 2: 0~20mA
3: 4~20mA 4: 0~10V and
4~20mA stacked
0
CD066 Lower Analog
Frequency
0.00~400.00 Hz 0.00
CD067
Bias Direction at
Lower Frequency
0: Positive direction
1: Negative direction
0
CD068 Higher Analog
Frequency
0.00~600.00 Hz 50.00