HLP-A Series
HLP-A Series
-
49
-
（
8
）
When using the f unction of UP and DOWN, the keys of
△ ▽
of the
panel are valid. After changing the values it needs to press SET (ENTER) key
for confirmation and then the inverter can implement the action. Meanwhile
the value will write to CD000, which will be memorized af ter a power
breakdown.
（
9
）
When keeping pressing UP or DOWN, the f requency will increase or
decrease rapidly to a point and then increase or decrease at even speed.
（
10
）
The value changed by UP or DOWN can be set through CD072 for
confirmation of whether it should be memorized or not memorized. For details
refer to CD072.
6. Function Description of Multi-speed 1, 2 and 3:
They are only valid when CD076 is set to 2. For details refer to CD076.
7. Function Description of Counter
:
Note:
(1) The signal width triggered should not be lower than 2 msec (t1
、
t2≥2msec) .
(2) When the counting value is reached the corresponding multi-output contact
will act.
(3) This counter can only count again after reset.
(4) When reaching to 65535 the counter will not count again.
8. Description of AutoPLC Clear Suspend:
For details refer to 10. Example Application of AutoPLC Suspend in Appendix
1 and the description of related parameters in CD095.
*CD056 Multi-Output 1 (DRV function)
Factory Setting: 01**
*CD057 Multi-Output 2 (UPF function)
Factory Setting: 05
*CD058 Multi-Output 3 (FA, FB, FC function)
Factory Setting: 02
*CD059 Multi-Output 4 (KA, KB function)
Factory Setting: 00
Set Range: 00—32 Unit: 1
00: Invalid: The terminal is set for no f unction to prevent false actions.
01: In Run: The contact will act when the inverter has output or receives the
running command.
Summary of Contents for HLP-A Series
