Holip HLP-A Series, Instruction Manual

Page: 85 / 117

HLP-A Series
HLP-A Series
-
80
-
5: Total running time of power up(Unit: Hour)
6-31: Invalid
This parameter is set for selection of displaying of DC voltage, AC voltage
and other items so that the customer can monitor and view them in sequence
through the switch key.
It can be is set first in the binary 3 bits mode, and then converted to a decimal
value.
CD168 Display Items Open
Set Range: 0—7 Unit: 1 Factory Setting: 0
0: Invalid 1: Valid
DC Voltage
AC Voltage
Select to display items of
CD167.
In the contents displayed the factory setting is to show output frequency, set
frequency, output current and output revolution through the switch key. If it is
necessary to view and monitor other items they can be set through CD167 and
CD168.
Factory setting is depending on the model. It can be observed, but not set.
CD169 Voltage Rating of Inverter Unit: 1V Factory Setting: *
It is depending on the model and can’t be changed.
CD170 Rated Current of Inverter Unit: 1A Factory Setting: *
It can be observed, but not set.
CD171 Software Version Factory Setting: *
When it has no fault record it shows ——. After access to this parameter the
fault display can be checked.
CD172 Fault Record 1 Factory Setting: ————
CD173 Fault Record 2 Factory Setting: ————
CD174 Fault Record 3 Factory Setting: ————
CD175 Fault Record 4 Factory Setting: ————