Holip HLP-A Series, Instruction Manual

Page: 66 / 117

HLP-A Series
HLP-A Series -
61
-
t5 Select Ramp Time 1 So CD079 is set to 99
t6 Select Ramp Time 1 Attach: 2
0
=1 2
1
=2 2
2
=4 2
3
=8
t7 Select Ramp Time 1 2 4 =16 2 5 =32 2 6 =64 2 7 =128
t8 Select Ramp Time 1
CD080 Frequency 2 Factory Setting 15.00**
CD081 Frequency 3 Factory Setting 20.00
CD082 Frequency 4 Factory Setting 25.00
CD083 Frequency 5 Factory Setting 30.00
CD084 Frequency 6 Factory Setting 35.00
CD085 Frequency 7 Factory Setting 40.00
CD086 Frequency 8 Factory Setting 0.50
Set Range: 0.00—400.00 Hz Unit: 0.01 Hz
This parameter is set in combination of the multi-inputls to select 4-speeds of
external control, multi-speeds of external control or multi-speeds of internal
control. For the relevant parameters refer to the description of CD076 and
CD087~CD094.
CD087 Timer 1 Factory Setting 10.0**
CD088 Timer 2 Factory Setting 10.0
CD089 Timer 3 Factory Setting 0.0
CD090 Timer 4 Factory Setting 0.0
CD091 Timer 5 Factory Setting 0.0
CD092 Timer 6 Factory Setting 0.0
CD093 Timer 7 Factory Setting 0.0
CD094 Timer 8 Factory Setting 0.0
Set Range: 0.0—6500.0S Unit: 0.1S
This parameter is set for the internal control multi-speeds and the running
time of drawing f unction. For the relevant parameter refer to CD076 and
CD080~CD088.
CD095 AutoPLC Memory Function
Set Range: 0—1 Factory Setting: 0
0: Not memorized
1: Memorized
This parameter is set to determine whether the inverter is to realize the
suspending f unction in AutoPLC mode. In case of CD095=1 it can memorize
the status in which the inverter is running and will memorize it at stop or
fail. It will continue to run when returning to normal. In case of CD095=0 it
will not memorize. For specific applications refer to Example Application 10 in
Appendix 1.