HLP-A Series
HLP-A Series
-
55
-
CD072 UP/DOWN Function
Set Range: 0-1
Unit: 1
Factory Setting: 0
0: Not memorized
1: Memorized
This parameter can be set for the selection of whether the values changed by
the UP or DOWN shall be memorized or not after stop. The changed values
whether to be memorized or not means when they are changed by UP or
DOWN during operation and the inverter is restarted after stop these changed
values shall be memorized or not af ter restart. When CD072 is set to 0, the
changed value will not be memorized and when it is set to 1, the changed values
will be memorized. The set values of CD000 will be memorized after restart.
For the related parameters refer to CD050-CD055.
CD073 UP/DOWN Speed
Set Range: 0-1
Unit: 1 Factory Setting: 0
0: 0.1Hz. Minimum UP/DOWN speed is 0.1Hz.
1: 0.01Hz. Minimum UP/DOWN speed is 0.01Hz.
Through the changes of this set value the UP/DOWN speed unit can be
adjusted to meet the needs of different customers.
CD074 Analog Filtering Constant
Set Range: 0-50
Unit: 1 Factory Setting: 20
The setting of this parameter is related to the analog responding speed. The
higher the value of CD074 is set, the lower the analog responding speed will be.
CD075 Intermediate Counter
Set Range: 0-65500
Unit: 1 Factory Setting: 0
Refer to CD064.
CD076 PLC Operation
Set Range: 0—5
Unit: 1 Factory Setting: 0
0: Normal operation, i.e. the inverter is running in the normal control mode.
1: External control 4-Speeds (Refer to the f unction description and diagram of
three terminals of high, middle and low speed in C050～C055)
2: External control multi-speeds
Summary of Contents for HLP-A Series
