Holip HLP-A Series, Instruction Manual

Page: 65 / 117

HLP-A Series
HLP-A Series
-
60
-
0: For. 1: Rev.
Main Speed (CD000) For.
Frequency 1 (CD080) Rev.
Frequency 2 (CD081) For.
Frequency 3 (CD082) Rev.
Frequency 4 (CD083) For.
Frequency 5 (CD084) For.
Frequency 6 (CD085) Rev.
Frequency 7 (CD086) For.
The parameter value 01001010 is converted to a decimal value:
1×2
6
+1×2
3
+1×2
1
=64+8+2=74
Then CD078=74
CD079 PLC Ramp Time
Set Range: 0~65535S Unit: 1S Factory Setting: 0
This parameter is only valid when CD076 is set to 4.
This parameter is set to determine the ramp time values for Step 1~4 of the
internal control multi-speed. The setting method is as follows:
① Determine each Ramp Time in the binary 2 bit mode
Bit1 Bit0 Ramp Time
0 0 Ramp Time 1 CD012, CD013
0 1 Ramp Time 2 CD014, CD015
1 0 Ramp Time 3 CD016, CD017
1 1 Ramp Time 4 CD018, CD019
② Determine the Ramp time of each speed step in the binary 16 bit mode
Step 8 Step 7 Step 6 Step 5 Step 4 Step 3 Step 2 Step 1
t8 t7 t6 t5 t4 t3 t2 t1
0 0 0 0 0 0 0 0 0 1 1 0 0 0 1 1
t1 Select Ramp Time 4
t2 Select Ramp Time 1
t3 Select Ramp Time 3 The setting value:
t4 Select Ramp Time 2 1×2
0
+1×2
1
+1×2
5
+1×2
6
=99