HNC Electric SV-E3 Series, Instruction Manual

Page: 133 / 178

133
For the wiring and basic parameter setting, refer to [Appendix 2 SV-E3 Positioner function].
■
In home position return, there are Arbitrary position, Stopper and Home position DOG front end and used in the situation of
selection of Z-phase as the base signal.
■
The home position return can be started by user I/O input.
■
If perform the home position return by Home position DOG front end, please use the user I/O input.
8.9.3 Types and parameter by home position return
1) Arbitrary position
Use the following parameter items in the box when use the arbitrary position as the base signal.
For the details of parameters, refer to [8.9.4 Parameter description].
For the examples of parameter setting method, refer to [8.9.8 Parameter description for home position return].
Figure 8.9.1
2) Stopper
Use the following parameter items in the box when use the stopper.
For the details of parameters, refer to [8.9.4 Parameter description].
For the examples of parameter setting method, refer to [8.9.8 Parameter description for home position return].