HNC Electric SV-E3 Series, Instruction Manual

Page: 10 / 178

10
1.4 Model selection of peripheral braking resistor
Rated output 50W 100W 200W 400W 750W 1kW 1.5 kW 2 kW
Resistance 40
～
50
Ω
40
～
50
Ω
40
～
50
Ω
40
～
50
Ω
40
～
50
Ω
30
Ω
30
Ω
20
Ω
Allowable
power
20W 20W 20W 20W 20W 40W 40W 60W
The Status monitoring mode on the setting panel can be used to confirm whether a regenerative resistor is needed. Select
「
St_REG
」
on the setting panel to display
「
in00_-
」
. When the display changes from
「
in00_-
」
to
「
in00_A
」
, it means the
regenerative resistor is needed. For details, refer to [5.4 Status display mode [Regenerative resistor]].
Starting from low speed operation (20% of the max. speed) to the desired operation and observing if the display value
changes from
「
in00_-
」
to
「
in00_A
」
If
「
in00_A
」
displays, a regenerative resistor is needed.
If the regenerative resistor is needed, refer to the installation of regenerative resistor. The use of regenerative resistor cannot
necessarily guarantee the performance. When heating temperature is too high, please increase the resistance, or the
permissible power.
1.5 Selection of cables and connector accessories for HNC ELECTRIC products
●
For 750W or less
Items Usage Model name Remark
1 Connector for drive and motor Power connector (CON-4P-M75A for 750W or less)
2 Power cable SV-E3-CAB-SE60-PWR-T-R50M Length: 0.5m
SV-E3-CAB-SE60-PWR-T-1R5M Length: 1.5m
SV-E3-CAB-SE60-PWR-T-3M Length: 3m
SV-E3-CAB-SE60-PWR-T-4M Length: 4m
SV-E3-CAB-SE60-PWR-T-5M Length:5m
SV-E3-CAB-SE60-PWR-T-6M Length:6m
SV-E3-CAB-SE60-PWR-T-7M Length:7m
SV-E3-CAB-SE60-PWR-T-10M Length: 10m
3 Brake connector CON-2P-BK (for 750W or less)
4 Encoder cable terminal SM-6P+172160-1 (for 750W or less)
5 Encoder cable SV-E3-CAB-SE60-ENC-T-R50M Length: 0.5m
SV-E3-CAB-SE60-ENC-T-1R5M Length: 1.5m
SV-E3-CAB-SE60-ENC-T-3M Length: 3m
SV-E3-CAB-SE60-ENC-T-5M Length:5m
SV-E3-CAB-SE60-ENC-T-10M Length: 10m
6 Encoder cable for absolute
（
Integrated battery box
）
SV-E3-CAB-SE60-BOX-T-R30M Length: 0.3m