HNC Electric SV-E3 Series, Instruction Manual

Page: 44 / 178

44
Torque command[0.1%]
The corresponding rated torque of 1000 is 100%, and corresponding
rated torque of 3000 is 300%.
Load ratio[digit]
Permissible value is about 1000(load ratio 100[%]), overload error
occurs when the load continuously exceed 1440s.
Encoder/Rotor mechanical angle (1 rotation) [pulse]
1 rotation absolute angle data of rotor output by the encoder
Encoder/Rotor mechanical angle (integrate) [pulse]
Multi-rotation integrate angle data of rotor output by the encoder
when using absolute encoder.
Regenerative status
Display regeneration status.
For details, refer to [4-4-4 Regenerative status].
Main circuit voltage[0.1V]
Display the main circuit voltage.(reference value)
※
Display only in the model
「
DA2
□□
2*
」
Model code of servo drive.
Display the model code of servo drive.
Model code of servo motor.
Display the model code of servo motor.
Model code of encoder.
Display the model code of encoder.
Serial number of servo drive.
Display the serial number of servo drive.
Serial number of servo motor.
Display the serial number of servo motor.
Serial number of encoder.
Display the serial number of encoder.
Table 5.4.2 Corresponding display for the letters