Rev. 6.0, 07/02, page 384 of 986
When SRAM interface is set, the
RD
signal, which can be used as
OE
, and write control signals
WE0
to
WE7
, are asserted.
As regards the number of bus cycles, from 0 to 15 waits can be selected with bits A3W2 to A3W0
in the WCR2 register. In addition, any number of waits can be inserted in each bus cycle by means
of the external wait pin (
RDY
).
The read/write strobe signal address and
CS
setup and hold times can be set within a range of 0–1
and 0–3 cycles, respectively, by means of bit A3S0 and bits A3H1 and A3H0 in the WCR3
register.
When synchronous DRAM interface is set, the
RAS
and
CAS
signals, RD/
WR
signal, and byte
control signals DQM0 to DQM7 are asserted, and address multiplexing is performed. When
DRAM interface is set, the
RAS
signal,
CAS0
to
CAS7
signals, and RD/
WR
signal are asserted,
and address multiplexing is performed.
RAS
,
CAS
, and data timing control, and address
multiplexing control, can be set using the MCR register.
Area 4: For area 4, external address bits A28 to A26 are 100.
SRAM, MPX, and byte control SRAM can be set to this area.
A bus width of 8, 16, 32, or 64 bits can be selected with bits A4SZ1 and A4SZ0 in the BCR2
register. When MPX interface is set, a bus width of 32 or 64 bits should be selected with bits
A4SZ1 and A4SZ0 in the BCR2 register. When byte control SRAM interface is set, select a bus
width of 16, 32, or 64 bits. For details, see Memory Bus Width in section 13.1.5.
When area 4 is accessed, the
CS4
signal is asserted, and the
RD
signal, which can be used as
OE
,
and write control signals
WE0
to
WE7
, are also asserted.
As regards the number of bus cycles, from 0 to 15 waits can be selected with bits A4W2 to A4W0
in the WCR2 register. In addition, any number of waits can be inserted in each bus cycle by means
of the external wait pin (
RDY
).
The read/write strobe signal address and
CS
setup and hold times can be set within a range of 0–1
and 0–3 cycles, respectively, by means of bit A4S0 and bits A4H1 and A4H0 in the WCR3
register.
Summary of Contents for SH7750 series
