![background image](http://html.mh-extra.com/html/hilti/ag-125-a22/ag-125-a22_operating-instructions-manual_2135577030.webp)
Noise information (as perEN 60745
ತ
2
ತ
3):
Typical A-weighted sound power level
94 dB (A)
Typical A-weighted emission sound pressure level
83 dB (A)
Uncertainty for the given sound level
3 dB (A)
Vibration information in accordance with EN 60745
Triaxial vibration value (vibration vector sum) for
the AG 125
ತ
A22
Measured in accordance with EN 60745
ತ
2
ತ
3
Surface grinding using the vibration-absorbing side
handle, a
h,AG
3.8 m/s
t
Uncertainty (K)
1.5 m/s
t
Additional information
Other applications such as cutting or wire brushing
may produce vibration values different to those
given.
5. Safety instructions
NOTE
The safety rules in section 5.1 contain all general
safety rules for power tools which, in accordance
with the applicable standards, must be listed in the
operating instructions. Accordingly, some of the rules
listed may not be relevant to this tool.
5.1 General power tool safety warnings
a)
WARNING
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for
future reference.
The term “power tool” in the
warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power
tool.
5.1.1 Work area safety
a)
Keep work area clean and well lit.
Cluttered or
dark areas invite accidents.
b)
Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust.
Power tools create sparks
which may ignite the dust or fumes.
c)
Keep children and bystanders away while oper-
ating a power tool.
Distractions can cause you to
lose control.
5.1.2 Electrical safety
a)
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools.
Unmodified plugs and matching outlets
will reduce risk of electric shock.
b)
Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of electric
shock if your body is earthed or grounded.
c)
Do not expose power tools to rain or wet con-
ditions.
Water entering a power tool will increase
the risk of electric shock.
d)
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts.
Damaged or entangled cords
increase the risk of electric shock.
e)
When operating a power tool outdoors, use an
extension cord suitable for outdoor use.
Use of
a cord suitable for outdoor use reduces the risk
of electric shock.
f)
If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply.
Use of an RCD reduces
the risk of electric shock.
en
26
Printed: 31.07.2012 | Doc-Nr: PUB / 5071441 / 000 / 00
Summary of Contents for AG 125-A22
