Hilti AG 125-A22, Operating Instructions Manual

Page: 29 / 342

Designation Short designation Description
Battery B 22/2.6 Li ತ ion
Battery B 22/3.3 Li ತ ion
Charger for Li-ion batteries C 4/36, C 4/36 ತ ACS or
C 4/36 ತ ACS TPS
Charger for Li-ion batteries C 4/36
ತ
90
Charger for Li-ion batteries C 4/36 ತ 350
4. Technical data
Right of technical changes reserved.
Power tool AG 125 ತ A22
Rated voltage 21.6 V
Rated speed 9,500/min
Cutting discs / grinding discs Ø 125
Dimensions (L x H x W) without hood 351 mm x 131 mm x 93 mm
Weight in accordance with EPTA procedure
01/2003 2.7 kg
Battery B 22/2.6 Li ತ ion B 22/3.3 Li ತ ion
Rated voltage 21.6 V 21.6 V
Capacity
2.6 Ah 3.3 Ah
Energy capacity 56.16 Wh 71.28 Wh
Weight 0.78 kg 0.78 kg
Type of cell Li-ion Li-ion
No. of cells 12 12
Deep discharge protection Yes Yes
Information about the power tool and applications
Drive spindle thread (arbor size) M 14
Spindle length 22 mm
NOTE
The vibration emission level given in this information sheet has been measured in accordance with a
standardised test given in EN 60745 and may be used to compare one tool with another. It may be used for a
preliminary assessment of exposure. The declared vibration emission level represents the main applications of
the tool. However if the tool is used for different applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly increase the exposure level over the total working
period. An estimation of the level of exposure to vibration should also take into account the times when the
tool is switched off or when it is running but not actually doing the job. This may significantly reduce the
exposure level over the total working period. Identify additional safety measures to protect the operator from
the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of
work patterns.
en
25
Printed: 31.07.2012 | Doc-Nr: PUB / 5071441 / 000 / 00