background image

1

© Copyright 2020 Zoeller

®

 Co. All rights reserved.

Model Number: ______________ 

 Date Code: _______________

 

Simplex

    

 

Duplex

 

 

Packaged System

 

 

Field Assembled System

 

Job Name: ____________________________________________

Distributor: ____________________________________________

Date of Purchase: _________  Zoeller S/O No.: ______________

Contractor: ____________________________________________

Date of Installation: ____________________________________

System Readings During Start-up:   Voltage _____ Amps _____ 

OWNER’S MANUAL

MODELS 840, 841 & 842 SUBMERSIBLE GRINDER UNITS

in the ownership of a Zoeller

®

 submersible wastewater product.  

Please read and review this manual before installing the product.  
Follow the steps in this manual for a proper start-up.  Many items 
contained within, when followed correctly, will not only ensure a long 
and problem-free life for the pump, but also save time and money 
during installation.  Reference FM1308 for model 840, FM2445 for 
model 842 and FM2180 for model 841 replacement parts.  Should 
further assistance be necessary please call our Technical Service 
Department at 1-800-928-PUMP (7867).

Owner’s Information

Safety Instructions

TO AVOID SERIOUS OR FATAL PERSONAL INJURY OR MAJOR 
P R O P E R T Y   D A M A G E ,   R E A D   A N D   F O L L O W   A L L   S A F E T Y  
INSTRUCTIONS IN THIS MANUAL AND ON THE PUMP.

THIS MANUAL IS INTENDED TO ASSIST IN THE INSTALLATION AND 
OPERATION OF THIS UNIT AND MUST BE KEPT WITH THE PUMP.

This is a SAFETY ALERT SYMBOL.

When you see this symbol on the pump or in the 

manual, look for one of the following signal words 

and be alert to the potential for personal injury or 

property damage.

Warns of hazards that WILL cause serious personal    

injury, death or major property damage.

Warns of hazards that CAN cause serious personal 

injury, death or major property damage.

Warns of hazards that CAN cause personal injury or 

property damage.

INDICATES SPECIAL INSTRUCTIONS WHICH ARE 
VERY IMPORTANT AND MUST BE FOLLOWED.

THOROUGHLY REVIEW ALL INSTRUCTIONS AND WARNINGS PRIOR TO 
PERFORMING ANY WORK ON THIS PUMP.

MAINTAIN ALL SAFETY DECALS.

PUMPS WITH THE “US” MARK ARE TESTED TO UL STANDARD UL778. CSA 
CERTIFIED PUMPS ARE CERTIFIED TO CSA STANDARD C22.2 NO. 108.

CAUTION

Table of Contents

Safety Instructions .......................................................................................1
Limited Warranty and Application ...............................................................2
Preinstallation Checklist ..............................................................................3
General Information......................................................................................4
Pump Wiring Instructions ............................................................................5
Typical Indoor Prepackaged System ...........................................................6
Indoor Prepackaged Installation Instructions ............................................7
Typical Outdoor Prepackaged System ........................................................8
Outdoor Prepackaged Installation Instructions ..........................................9
Operation .....................................................................................................10
Cutter Maintenance ....................................................................................11
Service Checklist ........................................................................................12

REFER TO WARRANTY ON PAGE 2.

FM2168

0320

Supersedes

0318

NOTICE TO INSTALLER: Instructions must remain with installation.

 

Congratulations on the purchase of a Zoeller

®

 submersible 

grinder pump.  Since 1939, the name Zoeller

®

 has represented the 

standard for submersible dewatering and sewage pumps.  The same 
high quality workmanship and easy maintenance design has been 
incorporated into this line of heavy-duty submersible grinder pumps.  
This  Zoeller

®

 pump will provide years of trouble-free service when 

installed according to the manufacturer’s recommendations.
 

This manual incorporates the installation, operation, 

maintenance, and service instructions into one document to aid 

P/N 019557

Product information presented 

here reflects conditions at time 

of  publication. Consult factory 

regarding discrepancies or 

inconsistencies.

MAIL TO

:  P.O. BOX 16347 • Louisville, KY  40256-0347

SHIP TO

:  3649 Cane Run Road  • Louisville, KY  40211-1961

TEL

: (502) 778-2731 • 1 (800) 928-PUMP • 

FAX

: (502) 774-3624

Visit our website:

zoellerpumps.com

Register your 

Zoeller Pump Company 

Product on our website:

http://reg.zoellerpumps.com/

Summary of Contents for BA840













Reviews: