GE M
EDICAL
S
YSTEMS
D
IRECTION
FK091075, R
EVISION
04
V
IVID
3N P
RO
/E
XPERT
S
ERVICE
M
ANUAL
8-96
Section 8-6 - Lower Section Components Replacement
8-6-4
AC, BEP or FE Cable Replacement Procedure
Use the appropriate flat and Phillips-type screw drivers, a wire cutter, the appropriate Hex wrenches
and the appropriate Allen keys as indicated in the cable replacement procedure.
8-6-4-1
Preparation
Shut down the Vivid 3N Pro/Expert ultrasound unit, as described in
Chapter 3 -
Installation
.
8-6-4-2
AC, BEP or FE Cable Removal Procedure
1) Disconnect both ends of the required cable.
2) Open the plastic ties that hold the cables together.
3) Remove the required cable.
8-6-4-3
AC, BEP or FE Cable Installation Procedure
1) Route the required cable.
2) Connect both ends of the new cable.
3) Replace the ties and secure the cable in position.
