GE
D
IRECTION
5573152-100, R
EV
. 2
LOGIQ E9 S
ERVICE
M
ANUAL
Chapter 8 Replacement procedures
8 - 23
8-4-7 Loading the Application Software Only (cont’d)
After the reboot, the Start Application window displays.
6.) Remove the LOGIQ E9 Applications Software DVD from the DVD drive.
7.) Store the application disks with the system.
8.) Remove and destroy the previous Application software version disks.
9.) From the Start Application window, select “
Start
.”
The first time the application loads after a SW reload, you may see: the error shown in
"SW Reload Error Message." Select
OK
and reboot the system.
During the reboot process, the system may prompt for the Basic Option string (valid license) (see:
Figure 8-13 "Enter Option String" on page 8-24
.
If the Basic Option string is not saved in the Option Dongle, or if this is a software upgrade, the SW
License window may open.
NOTE:
If only the title bar is visible in the lower, left corner of the monitor, double-click the SW License
title bar to expand the window.
Figure 8-11 Start Application window (window will reflect actual software version
instead of “Rx.x.x”)
Figure 8-12 SW Reload Error Message
Summary of Contents for LOGIQ E9
Page 2: ......
Page 11: ...GE DIRECTION 5573152 100 REV 2 LOGIQ E9 SERVICE MANUAL xi ZH CN KO ...
Page 753: ......
Page 754: ......