GE LOGIQ E9, Service Manual

Page: 308 / 754

GE
D
IRECTION
5573152-100, R
EV
. 2 LOGIQ E9 S
ERVICE
M
ANUAL
8 - 24 Section 8-4 - Loading / Reloading / Upgrading the Software
8-4-7 Loading the Application Software Only (cont’d)
NOTE: All systems must have at least the Basic Option string for the software to run. Any single Option String
may enable multiple options (i.e., Basic).
Demo Option strings turn on all options for a limited period of time. Do Not leave a demo Option string
in a unit when it is sold to a customer.
8-4-7-1 Verifying the software versions
1.) From the Touch Panel, select Utility -> System -> About .
2.) Verify the software version. Ensure that the software version shown on the screen matches the
disk label.
8-4-7-2 Functional Checks
Perform the following functional checks to confirm the system is operational before returning the system
to the customer.
If all are successful, include the following debrief script: LOGIQ E9 Service Manual, Direction
5573152-100, Rev. 2. Equipment passed all required checks and is ready for use.
Figure 8-13 Enter Option String
Table 8-2 Loading the Application Software only Functional Checks
See:
Section Functional Check Debrief Script
4-2-2 Power ON/Boot Up
LOGIQ E9 Service Manual, Direction
5573152-100, Rev. 2. Equipment passed all
required checks and is ready for use.
4-2-3 Power shut down
4-3-13 Probe/Connectors Checks
4-3-5 B-Mode Checks
4-3-7 System CFM and PWD Checks
4-3-17 Mechanical Function Checks
4-3-10 Basic Measurements
4-3-17-6
Software DVR (Option) Configuration
Functional Checks
(if present)