GE LOGIQ E9, Service Manual

Page: 518 / 754

GE
D
IRECTION
5573152-100, R
EV
. 2 LOGIQ E9 S
ERVICE
M
ANUAL
8 - 234 Section 8-9 - BEP (Back End Processor) parts replacement
8-9-6-3 Calibration and adjustments
No calibrations or adjustments are needed after this part replacement.
8-9-6-4 Verification
Perform the following steps to verify that the product is functioning as intended after this replacement:
1.) Verify that all screws that you removed earlier have been installed.
2.) If finished, connect cables and Probes removed earlier.
3.) Power up the system to verify that it operates as intended.
8-9-6-5 Functional Checks
Perform the following functional checks to confirm the system is operational before returning the system
to the customer.
If all are successful, include the following debrief script: LOGIQ E9 Service Manual, Direction
5573152-100, Rev. 2. Equipment passed all required checks and is ready for use.
Table 8-148 BEP Battery Pack replacement Functional Checks
See:
Section Functional Check Debrief Script
4-2-2 Power ON/Boot Up
LOGIQ E9 Service Manual, Direction
5573152-100, Rev. 2. Equipment passed all
required checks and is ready for use.
4-2-3 Power shut down
4-3-13 Probe/Connectors Checks
4-3-5 B-Mode Checks
4-3-7 System CFM and PWD Checks
4-3-17 Mechanical Function Checks