GE Dash 3000, Service Manual

Page: 156 / 292

6-8 Dash 3000/4000 Patient Monitor Revision A
2000966-339
Configuration: Main Menu Selections
Admit Menu
The Admit Menu selection determines the function of the monitor. This
menu item is part of the Service Mode menu.
Before programming the Admit Menu, you must know if the monitor will
be used for standard adult, neonatal, or operating room monitoring, and
if the monitor will be moved from room to room. All combinations are
explained below.
„
Standard—configures the monitor to stay in one room for stationary
monitoring only. Monitors not connected to the Unity Network
(Ethernet connection) must use STANDARD configuration only.
„
Rover—configures the monitor to move from room to room for
stationary monitoring only.
„
Combo—configures the monitor to stay in one room for both
stationary and ambulatory (telemetry) monitoring. This monitor
displays all Tram module data combined with ECG data for
ambulatory patients.
NOTE
Users should be aware of a possible time discrepancy between the
waveforms from the Telemetry device and the waveforms hard-wired to
the Dash monitor. Users should not consider these waveforms to be
synchronous. If absolute synchronicity is desired, Combo mode should be
discontinued and the ECG waveforms should be acquired via the hard-
wired bedside monitor.
„
Rover Combo—configures the monitor to move from room to room for
both stationary and ambulatory (telemetry) monitoring.
1. Access Admit Menu option, starting from the Main Menu. Select
MORE MENUS > MONITOR SETUP > SERVICE MODE.
2. Enter password using the Trim Knob control to select the day and
month from monitor screen with leading zeros. (e.g. July 4 = 0407)
3. Select MENU SETUP > ADMIT MENU.
4. Use the Trim Knob control to select the function of the monitor.
5. Press Trim Knob control to exit.
↓ ↑
513A