GE Dash 3000 Service Manual Download Page 110

Page: 110 / 292

4-56

Dash 3000/4000 Patient Monitor

Revision A

2000966-339

Maintenance:

Checkout Procedures

Graph Speed Test

Using the

Trim Knob

control, access the Graph Setup menu starting

from the Main

Menu.

1. Select

MORE MENUS > MONITOR SETUP > GRAPH SETUP.

2. Select

SPEED:25

(default).

3. Verify that all eight speeds work.

Display Test

1. Hold the

NBP GO/STOP

and the

ZERO ALL

keys and press the

Trim Knob

control at the SAME time.

2. Release the

Trim Knob

control immediately.

3. Continue holding the

NBP GO/STOP

and the

ZERO ALL

keys.

4. Select “Video Test Screens.”

5. Test all screens:

White Screen.

Red Screen.

Blue Screen.

Green Screen.

Vertical Bars.

Speaker Test

1. Change the alarm volume of the monitor to 100%.

2. Verify the speaker volume of the monitor changes accordingly.

3. Return the volume of the monitor to the level it was previously set to,

before you changed it for this test.

Summary of Contents for Dash 3000





































































































































































































































































































Search results

Summary of Contents for Dash 3000

Reviews:

Related manuals for Dash 3000

Brands by name

Popular brands

GE Dash 3000, Service Manual

Search results

Summary of Contents for Dash 3000

Reviews:

Related manuals for Dash 3000

Brands by name

Popular brands