GE Dash 3000 Service Manual Download Page 44

Page: 44 / 292

2-26

Dash 3000/4000 Patient Monitor

Revision A

2000966-339

Equipment Overview:

Technical Specifications

FCC Compliance Information Statement

This device complies with Part 15 of the FCC Rules and with RSS-210 of
Industry Canada.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including

interference that may cause undesired operation.

WARNING

Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.

Summary of Contents for Dash 3000





































































































































































































































































































Search results

Summary of Contents for Dash 3000

Reviews:

Related manuals for Dash 3000

Brands by name

Popular brands

GE Dash 3000, Service Manual

Search results

Summary of Contents for Dash 3000

Reviews:

Related manuals for Dash 3000

Brands by name

Popular brands