Future Design MCT-CM, User Manual

Page: 23 / 247

MCT-CM
23
2.5.1 US2000B Configuration Settings
The US2000B provides a web-paged based configuration interface in order to allow the unit to be configured
for use. FDC provides the US2000B preconfigured for proper operation with your system. The following
information is provided for informational/troubleshooting purposes only. You do not have to configure your unit
prior to use.
There are three web pages that provide access to the required configuration settings. These include the Local
IP Config, RS232 and RS485 pages. The following images indicate the required configurations settings for
use.
In order to access the unit
’s web page, you must connect the unit to a PC (via the Ethernet port) and type the
IP address of the unit into a web browser (i.e., 192.168.0.7). Note that the PC and/or network the US2000B is
connected to must be in the same address/subnet range in order to connect to it (i.e., 192.168.0.XXX,
255.255.255.0).
Once connection is established, enter the default user name and password (admin, admin) and the web page
of the US2000B will be provided.