Future Design MCT-CM, User Manual

Page: 243 / 247

MCT-CM
243
1. Control Module (CM) Application Software
(Note 3)
0: CM22:
CM software for FDC C-Series R22
(note 1)
2: CM30: CM software for FDC 300 Series
(note 1)
7: CM22:
CM software for US2000B to FDC C-Series R22
(note 1)
8: CM30: CM software for US2000B to FDC 300 Series
(note 1)
9: Special
Note: As specified above, the CM includes the appropriate SD card
with corresponding application software to support dual
communication to the HMI and loop control(s) via the FC6A-SIF52
or separate component US2000B.
The US2000B requires a Cat5 patch cable to connect to the FC6A
control module and 9-pin null modem cable to connect to the HMI
(see Control System Options on the following page).
2. Optional Serial Communications
(Note 2)
0: None
1: FC6A-PC3
RS485 Modbus RTU port (slave)*
2: FC6A-PC1 RS232 port for Barcode Reader **
Note: Order of either communication option will also include
FC6A-HPH1 cartridge adapter.
* RS485 Modbus RTU port allows installation of remote display.
** Reader input is compatible for serial-based barcode readers.
3. Optional Digital Inputs
(Note 2)
0: None
1: FC6A-N08B1
8-digital input card (24Vdc)
2: FC6A-N08A11 8-digital input card (120Vac)
Note: The above optional digital inputs (DI) are in addition to the eight
24Vdc digital inputs that are standard on the CM; system maximum of
16 digital inputs.
4. Optional Digital Outputs
(Note 2)
0: None
1: FC6A-T08P1
8-digital output
– TTL 24Vdc (source)
2: FC6A-R081 8-digital output - Relay (240Vac 2-amps)
3: FC6A-T16P1 16-digital output
– TTL 24Vdc (source)
4: FC6A-R161 16-digital output - Relay (240Vac 2-amps)
Combination DO modules (maximum of 24 optional DO)
A: Item 1 / qty 2 G: Items 1 & 3
B: Item 1 / qty 3 H: Items 1 & 4
C: Item 2 / qty 2 J: Items 2 & 3
D: Item 2 / qty 3 K: Items 2 & 4
E: I tem 1 qty 2 & Item 2 qty 1
F: Item 1 qty 1 & Item 2 qty 2
Note: The above optional digital outputs (DO) are in addition to the 8
DO that are standard on the CPU; maximum of 32 DO.
5. Optional Analog I/O
(Note 2) (DIN Rail Mount – plug into CM)
0: None
1: 1 A-IO card
FC6A-L03CN1 (4-20mA or 0-10Vdc IO)
2: 2 A-IO cards FC6A-L03CN1 (4-20mA or 0-10Vdc IO)
3: 3 A-IO cards FC6A-L03CN1 (4-20mA or 0-10Vdc IO)
4: 4 A-IO cards FC6A-L03CN1 (4-20mA or 0-10Vdc IO)
5: 5 A-IO cards FC6A-L03CN1 (4-20mA or 0-10Vdc IO)
6: 6 A-IO cards FC6A-L03CN1 (4-20mA or 0-10Vdc IO)
7: 7 A-IO cards FC6A-L03CN1 (4-20mA or 0-10Vdc IO)
Note: Each I/O card has qty 2 Remote Setpoint input and quantity 1 Retransmission
output configurable for PV,SP or %Out
6. Optional Monitor Inputs
(Note 1) (serial connection to CM)
0: None
1: IO-8TCS:
(8-thermocouple input module - isolated)
2: IO-6RTD: (6-RTD input module)
3: IO-8AIIS: (8- input module 0-20 / 4-20mA - isolated)
4: IO-8AIVS: (8-analog input 0-10 / 2-10Vdc
—isolated)
Combination Monitor Input Modules (maximum of 2 & 15 points)
A: Item 1 / qty 2 F: Items 1 & 3
B: Item 2 / qty 2 G: Items 1 & 4
C: Item 3 / qty 2 H: Items 2 & 3
D: Item 4 / qty 2 I: Items 2 & 4
E: Items 1 & 2 J: Items 3 & 4
7. Special
0: None
Note 1: Maximum of 2 monitor input cards monitoring a maximum of 15 monitor card
inputs. With specific CM software (CM30) , the loop control’s input #2 may be
configured as a monitor point. System maximum of 15 monitor points made up of
loop control input #2, inputs of monitor cards or combination of both.
Note 2: CM will support up to 7 expansion modules (the monitor point input module
is not a CM expansion module).
Note 3:
CM-XXXXXXX includes the following standard components:
Part #: FC6A-D16R1CEE
Control Module with 8 Digital Inputs (DI) and 8 Relay Outputs (DO)
Part #: FC6A-SD
SD Memory Card with specified loop control firmware.
All other CM (Control Module) options are packaged separately and like the FC6A-
SIF52 must be plugged into the FC6A-D16R1CEE bus as described in the manual.
The exception is the Monitor Card(s) which are not part of the FC^A-D16R1CEE bus
and have separate power supply and RS485 communication wiring. The Monitor Card
serial RS485 is wired to the FC6A-SIF52 card along with any loop controls.