Future Design MCT-CM, User Manual

Page: 245 / 247

MCT-CM
245
A.8 Support and Warranty Information
SOFTWARE VERSIONS FOR FDC MCT-CM Control System
The software version levels for the MCT Control system can be viewed in the offline system setup, from the
System menu; select
‘About’. Both the HMI (Human Machine Interface – color touch screen) and Control
Module (Idec FC6A) firmware and software versions will be displayed.
When obtaining replacement parts or to get assistance for setup and/or troubleshooting purposes, it is important
to have this information available to ensure that your request is processed properly and in a timely manner. It
is recommended that this information be written down and kept in a readily accessible location along with this
manual, so that it is available when required.
CE Net Version:
CM Firmware Version:
HMI Version:
CM Program Version:
CE Image Version:
CE BSP Version:
The CE Net version of the HMI, and firmware versions of the Control Module and FDC loop
control of the MCT control system are proprietary and only available directly from Future
Design Controls.
Using similar or like components obtained from a source other than Future Design Controls
will cause unexpected operation and/or malfunction of the MCT control system. Any attempts
to do so will be at the user’s own risk and void any and all claims or warranties with Future
Design Controls.
In addition, installing Future Design Controls MCT software on hardware not obtained directly
from Future Design Controls is a violation of the software license agreement. See the Future
Design Controls Software License agreement on the following page. By installing and/or using
the MCT Control System, you are accepting the terms of the software license.