Future Design MCT-CM, User Manual

Page: 71 / 247

MCT-CM
71
MCT Function Runtime Menu Location Description
Automatic Program Jump
Entry Program\Entry ability to view/program jump steps in an automatic
program
NOTE: If a program is loaded that has jump steps
programmed, the operator will be unable to view or
change the jump step settings.
Automatic Program Wait
For Program\Entry ability to view/program wait for conditions in an automatic
program
NOTE: If a program is loaded that has wait for conditions
programmed, the operator will be unable to view or
change them.
Automatic Program
AutoStart Program\View\AutoStart ability to view/program auto start settings for an
automatic program
NOTE: If a program is loaded that has auto start
programmed, the operator will be unable to view or
change the auto start settings.
Data Logging Data\Data
Notifications enable/disable data logging, select points for logging,
access to historical viewer, FTP and USB File utilities
view data log status, length and interval
NOTE: If data logging is set to log on program operation
or when MCT starts and this menu is then disabled, data
logging will be disabled. This menu item must remain
visible in order for the built-in data logging of MCT to
function.
The USB File utilities will not be accessible to copy or
delete data, alarm, audit or program files. Alarm, audit
and data files may be transferred via FTP if unit is so
configured.
Data Log Viewer Data\Chart access to view historical data log files
Annotations Data\View\Annotation access to add and view operator annotations to data files
Digital Signatures Data\View\Signature access to view and add digital signature to data log file
File Utilities Data\Utilities\USB access to copy/delete alarm, audit, program and data log
files
Note:
Alarm, audit and data files may be transferred via
FTP if unit is so configured.
FTP/WAN Settings Data\Utilities\FTP/WAN access to view/configure FTP file transfer settings
NOTE:
Once the FTP is configured for Auto Backup in
the runtime application, this menu item can be disabled
and hidden from the operator so that OEM configuration
is preserved and cannot be accessed or altered. The
Auto Backup to the FTP Server would occur as
configured.
Defrost Device\Settings\View\Defrost view defrost status, activate demand defrost and set
interval and duration times
Redundancy Device\Settings\View\Redundancy view redundancy status and set primary system,
operating mode and cycle times