Future Design MCT-CM, User Manual

Page: 89 / 247

MCT-CM
89
The loop name and loop units , shown at the bottom of each loop (or monitor point), will display the tagname
and units as entered in the Configurator.
5.5.1.1 Historical Minimum and Maximum
The MCT monitors and stores the minimum and maximum process value reached during operation for each
loop and monitor in the system. The current historical values can be viewed by pressing the process value
display field for the desired loop or limit.
Pressing the “OK” button will close the dialog window and return to the Loop view screen. The historical values
are reset each time the runtime application is started and
can also be manually cleared by pressing the “PV”
tag on the Loop view screen.
Pressing the “Yes” button in the dialog window will reset historical minimum and maximum values and default
them both to the current process value. Pressing “No” will simply close the dialog.
5.5.1.2 Manual Operation
The Manual Operation button
displays a “slide out” window providing access to all events programmed for the
system. To turn each event and its corresponding output on or off, simply press the button associated with the
event. Slide the list up or down as necessary to view additional events if more are programmed than can be
displayed in the window at one time.