Fuji Xerox DocuPrint P505 d User Manual Download Page 95

Page: 95 / 279

Home

Cen

tre

Ware

In
tern

et Se



Usage Counters

You can check the detailed usage counters.

Note



"Impressions" in Usage Counters means the counts of images. For example, 2-sided printing increases the
impressions by two.

Quick Links

[Quick Links] provides some convenient functions.

Cloning

This page allows you to copy and download the setting information file of the printer and
to install the setting information file of another machine.



Install Clone File

Locate a setting information file to be installed and then select [Install] to start the
installation.



Create Clone File

To download a setting information file, select the items to copy and then select [Create].

Note



The clone file is downloaded in a format which cannot be edited by users.

You can select the following items.

[Total Impressions]

Displays the total number of [Black Impressions].

[Black Impressions]

Displays the total number of pages printed in black and white.

[Black Printed Impressions]

[Single Impressions]

Displays the total number of impressions counted for
maintenance services.

[Black Single Impressions]

[Stored Image Printed
Impressions]

Displays the total number of stored images printed.

[Black Stored Image Printed Impressions]

[Black Sheets]

Displays the total number of sheets of paper printed in black and
white.

[Black Printed Sheets]

[Black Printed 2-Sided Sheets]

[Sheets]

Displays the total number of sheets of paper printed.

(1 Sided and 2 Sided)

[Printed Sheets]

[2-Sided Sheets]

Displays the total number of sheets of paper printed in 2-sided
format.

[Printed 2-Sided Sheets]

[Select/Clear All]

Check or uncheck all the items.

[Device App]

[Jobs App]

[USB App]

Summary of Contents for DocuPrint P505 d























































































































































































































































































Search results

Summary of Contents for DocuPrint P505 d

Reviews:

Related manuals for DocuPrint P505 d

Brands by name

Popular brands

Fuji Xerox DocuPrint P505 d, User Manual

Search results

Summary of Contents for DocuPrint P505 d

Reviews:

Related manuals for DocuPrint P505 d

Brands by name

Popular brands