Fuji Xerox DocuPrint P505 d User Manual Download Page 231

Page: 231 / 279

Error Code

231

Proble

Solvin

027-447

[Cause]

The IP address of IPv6 network already exists.

[Remedy]

Change the [Link-local Address] for IPv6 on the machine, or the IP
address of IPv6 on the network device, to remove the duplication
of addresses.

027-452

[Cause]

IPv4 address duplication on the network.

[Remedy]

Change the IPv4 address of the printer or the device on the
network.

027-500

[Cause]

Unable to connect to the SMTP server.

[Remedy]

Specify the SMTP server name correctly or specify the server by
using its IP address.

027-504

[Cause]

An SMTP server error occurred.

[Remedy]

Execute the operation again. If the error still is not resolved,
contact our Customer Support Center.

027-700

[Cause]

The domain section of the recipient's e-mail address is a
prohibited domain.

[Remedy]

Specify a domain that is not prohibited for the domain section of
the recipient's e-mail address.

027-701

[Cause]

The network cable is disconnected from the machine.

[Remedy]

Connect the network cable securely if the cable is disconnected.

027-702

[Cause]

The specified recipient's certificate does not exist.

[Remedy]

027-703

[Cause]

The specified recipient's certificate has expired.

[Remedy]

027-705

[Cause]

The specified recipient's certificate has been revoked.

[Remedy]

Specify a valid certificate for the recipient.

027-710

[Cause]

No S/MIME certificate is attached to the received e-mail.

[Remedy]

Ask the sender to send the e-mail with an S/MIME certificate
attached.

027-711

[Cause]

No S/MIME certificate can be obtained from the received e-mail.

[Remedy]

Import the sender's S/MIME certificate to the machine, or ask the
sender to send S/MIME signature mail with an S/ MIME certificate
attached.

027-712

[Cause]

The received S/MIME certificate has expired, or is an unreliable
certificate.

[Remedy]

Ask the sender to send the e-mail with a valid S/MIME certificate
attached.

027-713

[Cause]

The received e-mail has been discarded because it may have been
altered on its transmission route.

[Remedy]

Inform this error to the sender, and ask the sender to send the e-
mail again.

027-714

[Cause]

The received e-mail has been discarded because the address in its
From field is different from the mail address in the S/MIME
signature mail.

[Remedy]

Inform the sender that the mail addresses differ, and ask the
sender to send the e-mail again.

Error

Code

Cause/Remedy

Summary of Contents for DocuPrint P505 d























































































































































































































































































Search results

Summary of Contents for DocuPrint P505 d

Reviews:

Related manuals for DocuPrint P505 d

Brands by name

Popular brands

Fuji Xerox DocuPrint P505 d, User Manual

Search results

Summary of Contents for DocuPrint P505 d

Reviews:

Related manuals for DocuPrint P505 d

Brands by name

Popular brands