Fuji Xerox DocuPrint P505 d User Manual Download Page 220

Page: 220 / 279

Problem Solving

220

Proble

Solvin

018-433

[Cause]

IPv6 address (self-assigned address 3) duplication on the network
used for Wi-Fi.

[Remedy]

Change the IPv6 address of the device on the network.

018-434

[Cause]

The IPv6 address (manual) is invalid on the network used for Wi-
Fi.

[Remedy]

Change the IPv6 address manually configured for the machine.

018-435

[Cause]

IPv6 address (manual) duplication on the network used for Wi-Fi.

[Remedy]

Change the IPv6 address manually configured for the machine, or
change the address of the device.

018-436

[Cause]

The link-local address of the machine is duplicated on the network
used for Wi-Fi.

[Remedy]

Change the IPv6 address of the device of the network.

018-439

[Cause]

Wi-Fi Direct error due to Ad hoc confliction.

[Remedy]

Change [Network Type] for [Wi-Fi] to [Infrastructure].

018-440

[Cause]

Wi-Fi Direct error due to IPv6 confliction.

[Remedy]

Change [IP Mode] to [Dual Stack] or [IPv4].

018-441

[Cause]

Wi-Fi Direct error due to 5 GHz mode confliction.

[Remedy]

Change [Wi-Fi Band] to [Auto] or [2.4 GHz].

018-556

[Cause]

Received the "XRXERROR" error detection code from the HTTP
server.

[Remedy]

1. Check whether the specified drive and directory is available on

the destination HTTP server for the scanned document.

2. Perform the same operation again. If the problem persists,

contact our Customer Support Center.

018-560

[Cause]

A user authentication error occurred. (Received HTTP Status 401).

[Remedy]

Check the following:



The destination HTTP server for the scanned document is
accessible by PC.



The HTTP server name



The HTTP server path name

018-561

[Cause]

The hostname or the script storage location is not correct.
(Received HTTP Status 404).

[Remedy]

Check the following:



The destination HTTP server for the scanned document is
accessible by PC.



The HTTP server name



The HTTP server path name

018-562

[Cause]

A client-side error occurred. (Received HTTP Status 4xx other than
401 and 404).

[Remedy]

Check the following:



The destination HTTP server for the scanned document is
accessible by PC.



The server settings

Error

Code

Cause/Remedy

Summary of Contents for DocuPrint P505 d























































































































































































































































































Search results

Summary of Contents for DocuPrint P505 d

Reviews:

Related manuals for DocuPrint P505 d

Brands by name

Popular brands

Fuji Xerox DocuPrint P505 d, User Manual

Search results

Summary of Contents for DocuPrint P505 d

Reviews:

Related manuals for DocuPrint P505 d

Brands by name

Popular brands