Fuji Xerox DocuPrint P505 d User Manual Download Page 214

Page: 214 / 279

Problem Solving

214

Proble

Solvin

016-759

[Cause]

The number of pages reached the maximum number of pages for
this service.

[Remedy]

Consult your system administrator.

016-760

[Cause]

An error occurred during PostScript

processing.

*: An optional component is required for some models. For more
information, contact our Customer Support Center.

[Remedy]

Take one of the following measures:



Enable High Speed Image Processing. See the help of the print
driver.



Increase PostScript memory.

016-761

[Cause]

An error occurred during image processing.

[Remedy]

Enable High Speed Image Processing. See the help of the print
driver. If the error is not resolved, set [Print Page Mode] to [On].

016-762

[Cause]

The specified printer language is not installed on the machine.

[Remedy]

Specify correct printer language.

016-764

[Cause]

Unable to connect to the SMTP server.

[Remedy]

Consult the SMTP server administrator.

016-765

[Cause]

Unable to send the e-mail because the hard disk on the SMTP
server is full.

[Remedy]

Consult the SMTP server administrator.

016-766

[Cause]

An error occurred on the SMTP server.

[Remedy]

Consult the SMTP server administrator.

016-767

[Cause]

Unable to send the e-mail because the address is not correct.

[Remedy]

Confirm the address, and try sending again.

016-768

[Cause]

Unable to connect to the SMTP server because the machine's mail
address is incorrect.

[Remedy]

Confirm the machine's mail address.

016-769

[Cause]

The SMTP server does not support delivery receipts (DSN).

[Remedy]

Send e-mail without setting delivery receipts (DSN).

016-781

[Cause]

Probable causes are as follows:

1. The mail server cannot be found during e-mail sending (TCP/IP

session establishment failed).

2. The machine received an SMTP server error from the mail server

during e-mail sending.

[Remedy]

For 1, take one of the following measures:



Check whether the network cables are plugged in securely.



Check whether the IP address of the SMTP server is specified
correctly.

For 2, check whether or not ASCII characters are used in
machine's e-mail address and host name. Available ASCII
characters are alphabets and numbers.

016-792

[Cause]

The specified job history does not exist.

[Remedy]

Try the same operation.

Error

Code

Cause/Remedy

Summary of Contents for DocuPrint P505 d























































































































































































































































































Search results

Summary of Contents for DocuPrint P505 d

Reviews:

Related manuals for DocuPrint P505 d

Brands by name

Popular brands

Fuji Xerox DocuPrint P505 d, User Manual

Search results

Summary of Contents for DocuPrint P505 d

Reviews:

Related manuals for DocuPrint P505 d

Brands by name

Popular brands