manualshive.com logo in svg

Fuji Xerox DocuPrint P505 d, User Manual

The Fuji Xerox DocuPrint P505 d is a high-quality laser printer that delivers exceptional print speed and outstanding print quality. For a seamless user experience, we provide a detailed User Manual for free download on our website, ensuring you can optimize all the features and functions of this impressive printer.

Share
Download
background image

Paper Jams

259

 Proble

m

 Solvin

g

11

Paper Jams

When a paper jam occurred, the machine stops and an alarm beeps. A message is also 
displayed on the touch screen. Follow the instructions displayed to remove the jammed 
paper.

Gently remove the paper to avoid it to be torn. If the paper is torn, remove all the torn 
pieces, making sure that none remain inside the machine.

If a paper jam message appears again after you have cleared the paper jam, another paper 
jam may be occurred in some other parts of the machine. Clear this by following the 
message.

When the paper jam is cleared, printing is automatically resumed from the point when the 
paper jam occurred.

Important

When a paper jam occurred, if you pull out a paper tray without checking the paper jam location, the 
jammed paper may be torn and the pieces may remain inside the machine. This may cause machine 
malfunctions; therefore, always check where the paper jam occurred first.

If any piece of jammed paper remains inside the machine, the paper jam message will not disappear from 
the touch screen.

Clear the paper jams while the machine is powered on. If you turn off the machine, all data stored on the 
memory of the machine will be erased.

Do not touch components inside the machine. This may cause print defects.

WARNING

Fusing Unit Safety
Do not dismantle the Fusing Unit.  When removing paper jam from the Fusing 
Unit, contact your local Fuji Xerox representative.  Otherwise, it may cause 
injuries.

CAUTION

Do not attempt to remove a paper deeply jammed inside the product, particularly 
a paper wrapped around the fusing unit or the heat roller. Otherwise, it may cause 
injuries or burns. Switch off the product immediately and contact your local Fuji 
Xerox representative.

Summary of Contents for DocuPrint P505 d
























































































































































































































































































Reviews:

No comments

Related manuals for DocuPrint P505 d

Canon iR3245 Troubleshooting Manual preview
iR3245
Brand: Canon Pages: 300
Canon iR3245 Network Manual preview
iR3245
Brand: Canon Pages: 288
MAKER MADE 300X Setting Up preview
300X
Brand: MAKER MADE Pages: 21
Canon iR3245 User Manual preview
iR3245
Brand: Canon Pages: 58
Canon iR1510 Quick Start Manual preview
iR1510
Brand: Canon Pages: 30
Xerox 220 Getting Started preview
220
Brand: Xerox Pages: 48
Oce 3155 System Data preview
3155
Brand: Oce Pages: 4
B9Creations B9Clean User Manual preview
B9Clean
Brand: B9Creations Pages: 25
Dascom TALLY MIP480 User Manual preview
TALLY MIP480
Brand: Dascom Pages: 138
Dascom T2150 User Manual preview
T2150
Brand: Dascom Pages: 166
Datecs EP-60 Programmer'S Manual preview
EP-60
Brand: Datecs Pages: 29
QMS 2425 Getting Started preview
2425
Brand: QMS Pages: 144
Xerox WORKCENTRE 5735 Information Manual preview
WORKCENTRE 5735
Brand: Xerox Pages: 50
Panasonic WORKIO DP-C106 Operating Instructions Manual preview
WORKIO DP-C106
Brand: Panasonic Pages: 166
Xiamen PAPERANG MonoSnap Lite User Manual preview
PAPERANG MonoSnap Lite
Brand: Xiamen Pages: 7
Flashforge Creator 4 User Manual preview
Creator 4
Brand: Flashforge Pages: 36
Intermec PB3 Series User Manual preview
PB3 Series
Brand: Intermec Pages: 38
Olivetti d-COLOR MF3800 Manual preview
d-COLOR MF3800
Brand: Olivetti Pages: 82

Brands by name

Popular brands

Load more brands