Fuji Xerox DocuPrint P505 d, User Manual

Page: 109 / 279

Connectivity
109
Cen
tre
Ware
In
tern
et Se
rv
ic
es
7
on Devices (WSD)). For IPPS, you can use 443 (HTTPS), and cannot use 80 (HTTPS) or a well-known port
(HTTPS).

TBCP Filter
Select this to enable TBCP filter for PostScript data. When the transmission data includes
binary data or EPS data, disable this.

Password Required
Select this to authenticate with a password.

Connection Timeout
Select this to set the timeout.

Timeout
Sets the connection time-out period.

Spool
Select [On] to enable spooling.
IPsec
Configure the IPsec settings.
Note
 For [IKE Authentication Method], [Preshared Key], [DH Group], and [PFS], consult your network administrator.
Enable Select whether or not to enable IPsec
communications.
IKE Authentication Method Set the IKE authentication method. Select from
[Digital Signature] or [Preshared Key].
Preshared Key Enter a preshared key. This setting is valid when
[IKE Authentication Method] is set to
[Preshared Key].
Retype Preshared Key Re-enter the preshared key for confirmation.
Device Certificate Select a certificate for IPsec communications.
Select a certificate when [IKE Authentication
Method] is set to [Digital Signature]. A self-
signed certificate created by CentreWare
Internet Services cannot be used.
IKE SA Lifetime Specify IKE SA lifetime from 5 to 28800
minutes in 1 minute increments.
Note

The value must be equal to or greater than the
value set in [IPsec SA Lifetime].
IPsec SA Lifetime Specify IPSec SA lifetime from 300 to 172800
seconds in 1 second increments.
Note

The value must be equal to or smaller than the
value set in [IKE SA Lifetime].
DH Group Set DH group. Select from [G1], [G2], and [G14].
PFS Select whether or not to enable PFS.