Fuji Xerox DocuPrint P505 d, User Manual

Page: 210 / 279

Problem Solving
210
Proble
m
Solvin
g
11
016-700 [Cause]
The job was suspended because the number of the digits for the
Secure Print or Charge Print passcode set on the print driver was
less than the minimum passcode length for stored jobs specified
on the machine.
[Remedy]
On the print driver, set the passcode string equal to or longer than
the specified minimum passcode length for stored jobs.
016-701 [Cause]
Unable to process print data because of insufficient memory.
[Remedy]
Stop unnecessary ports or delete unnecessary data to increase
memory.
016-702 [Cause]
Unable to process print data because of insufficient print page
buffer.
[Remedy]
Take one of the following measures:

Lower the print image quality. See the help of the print driver.

Increase the print page buffer size by adding memory.
016-705 [Cause]
Probable causes are as follows:
1. You have not used the print driver for the machine.
2. The machine received a Secure Print, Print Stored File, Charge
Print, or Private Charge Print job with no hard disk installed.
[Remedy]
For 1, use the print driver appropriate for the machine.
For 2, check whether the hard disk is installed on the machine.
If the hard disk is not installed:
 If you do not need to use the feature, select [Not Installed]
under [Hard Disk] on the [Options] tab of the print driver.

If you need to use the feature, install the hard disk.
If the hard disk is installed:

Select [Installed] under [Hard Disk] on the [Options] tab of the
print driver.
If the error still is not resolved, contact our Customer Support
Center.
016-706 [Cause]
The storage space is insufficient because the number of Secure
Print users exceeded the maximum limit.
[Remedy]
Delete unnecessary files from the machine, and delete
unnecessary Secure Print users.
016-707 [Cause]
A Sample Set job error.
[Remedy]
Contact our Customer Support Center.
016-708 [Cause] Unable to annotate because of insufficient storage space.
[Remedy] Delete unnecessary data from the storage space.
016-709
016-710 [Cause] An error occurred during print processing.
[Remedy] Contact our Customer Support Center.
016-715 [Cause] The machine failed to access the ESCP form because the password
of the ESCP form does not match.
[Remedy] Enter the correct password of the ESCP form.
Error
Code
Cause/Remedy