Fuji Xerox DocuPrint P505 d User Manual Download Page 56

Page: 56 / 279

Paper and Other Media

pe
r an

d Ot

her M

For larger paper sizes, pull out, then open the Bypass Tray extension.

Move the paper guides toward the outside edges of the tray.

Load label sheets in the Bypass Tray, face up, with the top edge of the page feeding into
the printer first.

Adjust the paper guides to align the edges of the paper.

The printer prompts you to verify the type, size and color of the label sheets.

1) If the type, size and color are correct, select [OK].

2) If the type, size or color are incorrect, change the settings.



To select the type, touch the current paper type, and then select [Labels] from the list.

Summary of Contents for DocuPrint P505 d























































































































































































































































































Search results

Summary of Contents for DocuPrint P505 d

Reviews:

Related manuals for DocuPrint P505 d

Brands by name

Popular brands

Fuji Xerox DocuPrint P505 d, User Manual

Search results

Summary of Contents for DocuPrint P505 d

Reviews:

Related manuals for DocuPrint P505 d

Brands by name

Popular brands